China ucp 209 bearing price

The UCP 209 is a standard pillow block bearing consisting of a UC209 insert bearing and a P209 cast iron housing. You must verify the bore diameter is exactly 45mm. Ensure the housing material is HT200 or HT250 grey cast iron for vibration damping, and the bearing steel is GCr15 (SAE 52100) high-carbon chromium steel with a hardness of HRC 60-65 for maximum wear resistance.

Check the Basic Dynamic Load Rating (Cr), which should be approximately 34.1 kN, and the Static Load Rating (Cor), around 21.3 kN. For high-speed applications, confirm the limiting speed (usually around 3,700 RPM with grease lubrication). Request a noise and vibration test report (Z1V1 or Z2V2 levels) to ensure smooth operation and longevity.

Look for a double-lip seal (2RS) or a sling seal design to prevent dust and moisture ingress. The housing should include a brass or steel grease nipple for re-lubrication. Ensure the bearing comes pre-filled with high-quality lithium-based grease capable of operating in temperatures ranging from -20°C to +120°C.

The supplier should adhere to ISO 9001:2015 for quality management. The dimensions must comply with ISO 3228 or DIN 626-1 standards to ensure interchangeability with international brands like SKF or NSK. For environmental compliance, ensure the product meets RoHS and REACH requirements if exporting to the EU.

Always request a Material Mill Test Certificate (MTC) to prove the use of GCr15 steel rather than inferior carbon steel. Conduct a third-party pre-shipment inspection (PSI) to perform a Rockwell Hardness Test. When sourcing from China, use Made-in-China.com to identify Audited Suppliers whose factory capabilities have been verified by independent agencies like SGS or Intertek.

Focus on the Total Cost of Ownership (TCO) rather than just the unit price. Negotiate for tiered pricing where the unit cost drops by 10-15% for orders exceeding 500 units. Ask for customized packaging (OEM) and the inclusion of spare grease nipples or specialized seals at no extra cost to increase the value of the deal.

Bearings are heavy and prone to oxidation. Ensure the supplier uses anti-rust oil coating, wraps each unit in VCI (Volatile Corrosion Inhibitor) paper, and places them in vacuum-sealed plastic bags. For shipping from China, use FOB (Free On Board) terms to maintain control over the freight forwarder and ensure the use of fumigated wooden pallets to prevent moisture damage during transit.

Utilize Secured Trading Services provided by platforms like Made-in-China.com to protect your payment until the goods are confirmed to be shipped. Avoid direct transfers to private accounts; always pay to the registered company bank account listed on the proforma invoice, and verify the company's business license matches the bank details.