Diesel engine for iveco 8140.23

The Iveco 8140.23 is a 2.8-liter direct injection turbocharged diesel engine. When sourcing, you must confirm the power output (typically 76kW/103HP), the bore and stroke (94.4mm x 100mm), and the compression ratio (18.5:1). Ensure the supplier provides the exact engine configuration (e.g., with or without alternator, starter motor, and turbocharger) to match your specific vehicle or industrial application.

Prioritize suppliers who perform dynamic load testing and provide a compression test report for each cylinder. For remanufactured units, verify that critical wear components like pistons, rings, bearings, and gaskets are replaced with OEM-equivalent parts. Ask for the hardness rating of the cylinder block and ensure the crankshaft has been balanced to prevent premature vibration-related failure.

Ensure the engine meets the required emission standards for your region, such as Euro 2 or Euro 3 for this specific model. The manufacturer should ideally hold ISO 9001 or IATF 16949 certifications, which guarantee a standardized quality management system for automotive components. For European markets, check for CE marking if the engine is intended for stationary industrial use.

The 8140.23 is highly versatile but requires verification of the flywheel housing and flywheel dimensions. You must confirm if the engine is set up for a manual or automatic transmission interface. If you are replacing an engine in a Fiat Ducato, Renault Master, or Iveco Daily, specify the model year to ensure the electronic control unit (ECU) wiring harness and sensor locations are compatible.

Due to the weight (approx. 200-250kg), engines must be shipped in fumigated solid wood crates or steel-framed pallets to prevent structural damage. Ensure the engine is completely drained of oil and coolant to comply with international air and sea freight regulations regarding hazardous materials. For cost-efficiency, Sea Freight (LCL or FCL) is recommended over air freight.

The primary risk is receiving a 'dead on arrival' (DOA) unit or a mismatched specification. Mitigate this by using Secure Payment services on Made-in-China.com to ensure funds are only released after shipping documents are verified. Always request a video of the engine running on a test bench featuring a unique serial number plate before the final balance payment is made.

Focus on the Warranty Period rather than just the unit price; a 12-month or 50,000km warranty is a sign of supplier confidence. If purchasing in bulk (5+ units), negotiate for free wearing parts kits (filters, belts, gaskets). Mention your interest in a long-term partnership to secure 'Gold Member' pricing tiers often available to repeat buyers on Made-in-China.com.

You will need a Commercial Invoice, Packing List, and Bill of Lading. Crucially, for engines, you may need a Certificate of Origin to benefit from preferential tariffs and a Technical Data Sheet to prove emission compliance to local environmental agencies. Ensure the HS Code (typically 840820) is correctly declared to avoid customs delays or fines.