Hishicross pattern glass

When purchasing Hishicross (cross-patterned) glass, you must prioritize thickness accuracy (typically 3mm to 10mm) and pattern depth consistency. Ensure the glass is made from high-quality silica sand to avoid a green tint, especially if you require Ultra-Clear (Low-Iron) versions. For safety applications, specify tempering requirements (ASTM C1048 or EN 12150) to ensure the glass breaks into small, blunt fragments upon impact.

Suppliers should provide certifications such as CE (Europe), AS/NZS 2208 (Australia), and ANSI Z97.1 (USA). If the glass is intended for furniture or architectural use, verify ISO 9001 quality management systems and REACH compliance for any coatings or laminates used. Always request a Certificate of Analysis (COA) for each batch to confirm light transmittance and mechanical strength.

The 'Hishicross' or 'Cross-Reed' pattern must be uniform across the entire sheet without distortions or air bubbles trapped within the texture. Request high-definition macro photos or physical samples to check for edge chips and surface scratches. The pattern should provide the desired level of obscurity (privacy level) while maintaining a light transmission rate of at least 80-90%.

This glass is highly sought after for interior partitions, shower enclosures, and cabinet doors due to its decorative privacy features. It is also widely used in lighting fixtures and office furniture. For outdoor applications like windows or entry doors, ensure the glass is laminated or tempered to meet local building safety codes.

Glass is a high-risk fragile commodity. Insist on professional export-standard seaworthy plywood crates with interleaving paper or powder between sheets to prevent scratches and moisture stains (glass mold). Ensure the supplier uses steel banding and corner protectors. For large orders, choose Full Container Load (FCL) over LCL to minimize handling, and always secure All-Risk Marine Insurance.

Focus on Tiered Pricing based on square meters and ask for a breakdown of the tempering and edging costs. Since glass prices fluctuate with energy and raw material costs, try to negotiate a price validity period of 30-60 days. For long-term partnerships, request OEM/ODM customization for specific pattern depths or logo sandblasting at a reduced mold fee.

Utilize the Secured Trading services on Made-in-China.com to protect your payment until the goods are shipped. Conduct a factory audit or third-party inspection (like SGS or Intertek) before the final payment is released. This inspection should specifically check for dimensional tolerances (usually ±0.2mm) and squareness of the cut.

Be aware of Anti-Dumping Duties (ADD) that some countries impose on glass products from specific regions. Check your local Harmonized System (HS) Code (typically 7003 or 7005) to determine import tariffs. Ensure the Bill of Lading and Packing List clearly state the glass type and processing (e.g., 'Tempered Patterned Glass') to avoid customs delays.