Pink color glass

Pink glass is typically produced using two main methods: Rare Earth Doping (using Erbium oxide for a soft, consistent pink) and Colloidal Gold (using gold chloride for a deep 'Cranberry' or 'Ruby' pink). For B2B buyers, it is crucial to specify the chemical composition as it affects both the light transmission rate and the final unit cost, with gold-based pinks being significantly more expensive.

Buyers should focus on Thickness Tolerance (typically ±0.2mm), Edge Processing (polished, beveled, or arrissed), and Tempering Standards. If the glass is for outdoor use, ensure it has UV Resistance to prevent color fading and meets ASTM C1036 or EN 572 standards for flat glass quality to ensure the absence of bubbles or inclusions.

The pink tint acts as a light filter. You must request the Visible Light Transmittance (VLT) and Solar Heat Gain Coefficient (SHGC) data. Pink glass often provides a warm aesthetic glow but may alter the color rendering of objects behind it; therefore, a Color Rendering Index (CRI) test is recommended for retail display applications.

If the pink glass is used for tableware or containers, it must pass Lead and Cadmium leaching tests (such as FDA 21 CFR or EU 84/500/EEC). For furniture components, ensure the glass meets Safety Glazing standards like ANSI Z97.1 to ensure it breaks into small, blunt fragments upon impact.

Glass is a high-fragility item. You must mandate Seaworthy Plywood Crating with interleaving paper or powder between sheets to prevent scratches and 'glass rot' (oxidation). Ensure the supplier uses steel banding and shock-absorption materials. It is highly recommended to include Impact Indicator stickers (e.g., ShockWatch) on the crates to monitor handling during shipping.

Focus on Yield Rates and Batch Consistency. Since pink glass can have slight shade variations between production runs, negotiate a Master Sample agreement where the supplier keeps a physical 'Golden Sample' to match all future batches. Request a tiered pricing model based on the yield of usable glass after cutting to minimize waste costs.

Always utilize Trade Terms that include Inspection Rights. Before the final 70% payment, hire a third-party inspector (like SGS or Intertek) to perform a Random Sampling Inspection focusing on color uniformity and edge strength. Use Secure Payment methods provided by reputable platforms to ensure funds are only released upon proof of shipment (Bill of Lading).

Verify the HS Code (typically under Chapter 70) with your local customs broker. Colored glass may attract different duty rates than clear glass. Ensure the Commercial Invoice clearly states the manufacturing process (e.g., tinted float glass vs. coated glass) to avoid misclassification and potential fines at the port of entry.