Silo plastic price

For standard silage pits or bunkers, a thickness of 125 to 150 microns (5-6 mil) is recommended. Ensure the material is 100% virgin LDPE or LLDPE to provide maximum puncture resistance and elasticity. Multi-layer co-extrusion technology (3-layer or 5-layer) is superior as it allows for specialized UV inhibitors in the outer layer and oxygen barriers in the inner layer.

Silo plastic must withstand intense sunlight; look for products with UV stabilization for at least 12 to 18 months of outdoor exposure. To prevent spoilage, the Oxygen Transmission Rate (OTR) should be as low as possible—ideally below 250 cm³/m²/24h. High-performance Oxygen Barrier Films (OBF) can reduce surface spoilage by up to 40% compared to standard polyethylene.

The most common configuration is Black/White (B/W) film. The white exterior reflects solar radiation to prevent overheating of the silage, while the black interior provides total opacity to inhibit light-induced fermentation issues. For colder climates, all-black films may be used to absorb heat, but B/W remains the global standard for temperature stability.

Buyers should request test reports for Dart Drop Impact strength (to ensure it won't tear when walked upon during installation) and Elongation at Break (which should be >400%). High tear resistance is essential to prevent small punctures from expanding into large rips under wind load.

Request a pre-shipment sample and perform a 'stretch and light' test. Recycled material often has impurities (small dots) when held up to the light and lacks the elasticity of virgin resin. On Made-in-China.com, prioritize Audited Suppliers who provide third-party verification of their raw material sources.

Silo plastic is heavy and dense. Ensure the supplier uses strong wooden pallets and reinforced core tubes to prevent the rolls from collapsing under their own weight during sea transit. Specify FOB or CIF terms clearly, and confirm that the container is moisture-proof to prevent core rot or 'telescoping' of the film rolls.

Pricing is heavily tied to global resin (PE) market rates. Negotiate based on weight (price per ton) rather than just price per roll to ensure transparency. For orders exceeding 10-20 tons, you can typically negotiate a 5-10% discount. Mentioning long-term seasonal demand can also help secure 'off-season' production pricing.

Use Secured Trading Services provided by platforms like Made-in-China.com to ensure payment is only released upon proof of shipment. Always insist on a Bill of Lading (B/L) and a Certificate of Analysis (COA) that matches the batch number of the delivered goods to ensure compliance with your technical requirements.