C2te High-Flex Large-Format Thin-Bed Tile Adhesive Powder, Waterproof High & Low Temperature Resistant Mortar for Sintered Stone & Vitrified Tiles

C2 refers to high bonding strength, much stronger than ordinary C1 adhesive. T means high anti-slip performance to prevent tile sagging and sliding on walls. E stands for extended open time, offering longer adjustment time and higher construction tolerance. C2TE is the high-grade standard for large tiles, sintered stone and low-absorption tiles.

Yes. With high-activity polymer modified formula, this professional no-back-butter adhesive can directly bond with dense and smooth tile backs of vitrified tiles, large slabs and sintered stones. No back glue or roughing treatment is required. It saves construction steps and avoids delamination risks caused by poor back glue quality.

No. Traditional back glue is only a thin interface layer which is easy to aging and delaminate. C2TE no-back-glue adhesive forms integrated polymer bonding with strong water resistance and aging resistance. It closely bites the tile back, ensuring stable long-term bonding without hollowing or falling off.

It is specially formulated for low-water-absorption, high-density and smooth-back tiles, including vitrified tiles, full-body marble, soft-gloss tiles, large-format tiles and thin sintered stones. It solves the common problems of poor adhesion, sliding and hollowing of ordinary mortar.

Ordinary tile adhesive dries fast with very short adjustment time, easily causing uneven gaps and misalignment. This C2TE adhesive has longer open time, allowing sufficient fine adjustment of flatness and gaps. It is perfect for large-area construction, greatly reducing rework rate.