Water-Based Latex Wall Paint for Wall Repair - Wall Patching Paint

Yes. Latex paint will layer and settle after storage. Stir thoroughly before use to ensure uniform color and consistency, preventing color difference and uneven coverage.

Moderate dilution is allowed. The recommended ratio for interior latex paint is 10%-20%. Dark paint and topcoat should be diluted little or not diluted. Over-dilution will cause powdering, poor coverage, cracking and reduced scrub resistance.

Short-pile rollers are for smooth walls to obtain fine paint film. Medium-pile rollers are universal for common putty walls. Long-pile rollers fit rough walls, raw walls and gypsum boards to avoid missing spots.

Use cross rolling method (vertical first, then horizontal) at a uniform low speed with 3-5cm overlap. Even the paint on the tray first, avoid paint accumulation or shortage, and finish one wall continuously.

Main causes: damp base, excessive water dilution, fast rolling speed and high humidity. Slight bubbles can be polished and repainted after drying. Remove defective film for large bubbling and repaint after the base is fully dry.