Powered by Made-in-China.com
Durable 125kw/261kwh Liquid-Cooled Bess Solution for High Performance C&I Storage
US$23,000.00-50,000.00
1 Set
Product profile
Customization
AvailableInstallation
Cabinet Floor-MountedEnergy Capacity
125kw/261kwhModel NO.
FGESS-125K/261K-0.4OWCycle Life
6,000 Cycles (@90% Dod, 70% Eol)Cooling Method
Liquid Cooling (DC Side)Battery Configuration
1p260sBattery Cell Type
LFP 3.2V/314ahProduct Type
All-in-One Integrated CabinetScalability
up to 10 Units in ParallelUse Cases 1
Peak-Valley ArbitrageUse Cases 2
Demand ControlUse Cases 3
PV-Storage-Charging IntegrationUse Cases 4
Microgrid/BackupTransport Package
Wooden PackageSpecification
2.8tTrademark
FGIOrigin
ChinaHS Code
8504409999Key features
The system equiped Liquid Cooling System for the DC side (Battery PACKs) and Air Cooling for the AC side (PCS/Electrical compartment).
Reduces on-site installation complexity. The unit supports plug-and-play operation and can run independently or in parallel with other cabinets.
Features a physical partition separating the Electrical Compartment and Battery Compartment using thermal insulation and flame-retardant materials.
Company profile
CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 10 years CertifiedNearest Port: Qingdao PortAverage Response Time: ≤5.61h
About Our Factory & Business Background
AddressMid-Section of Jincheng Road, North Side, Economic Development Zone, Wenshang County, Shandong 272500, Jining, Shandong, China
Plant Area122570 square meters
Number of Employees784
Registered Capital141,382,530 RMB
Terms of PaymentT/T, LC
International Commercial Terms(Incoterms)FOB
Average Lead TimePeak Season Lead Time: one month Off Season Lead Time: one month
Minimum Order Quantity1 set
Supply Chain Partners377
Our Production Capability & Technical Expertise
Main ProductsVFD, Bess, Svg, Statcom
Production Lines18
Production MachinesPCBA, Auto-production line, Auto-testing line, Laboratory
QA/QC inspectors64 people
Inspection Type for Finished Products100% inspection(Visual inspection & Function inspection)
Inspection Method for Finished ProductsHave instructions and uniformly followed
R&D Engineers79 people
Traceability of Raw MaterialsYes
Our Industry Experience & Global Business Record
Year of Establishment2004-08-10
Main MarketsSoutheast Asia/ Mideast, East Asia(Japan/ South Korea), Domestic
Repeat Buyers Choice80%~100%
Number of Foreign Trading Staff33
Overseas Agent/BranchYes
New Products Launched in Last yearYes
Our Certifications, Standards & Industry Recognition
Management System CertificationISO9001:2015, ISO45001:2018, ISO14001
Product CertificationCCC
Cooperated with Fortune 500Yes
Product Q&A
Q:What is the specific battery cell configuration inside the 261kWh cabinet?
A:
The battery cluster uses a 1P260S configuration. It consists of 5 individual battery PACKs, each with a capacity of 52.2kWh (configured as 1P52S). The total number of cells is 260.
Q:What are the cycle life specifications for this energy storage system?
A:
According to the test standards, the system is rated for 6,000 cycles under the following conditions: 25(degrees Celsius) ambient temperature, 0.5P charge/discharge rate, 90% Depth of Discharge (DOD), with 70% capacity retention at End of Life (EOL).
Q:Does the system support off-grid (islanded) operation?
A:
Yes. The integrated PCS supports off-grid operation.The AC output voltage is 400V (-15%~+15%),frequency is 50Hz,and the output voltage distortion rate is no more than 3%.
Q:What is the communication architecture of the BMS?
A:
The BMS adopts a two-level architecture. The BMU (Slave) communicates via Daisy Chain within the battery pack, while the BCMU (Master) communicates with external devices using CAN, RS485, and Ethernet protocols.
Q:What are the overheating protection measures for the battery?
A:
The system uses a liquid cooling method for the battery compartment. The optimal cycle temperature is 30(degrees Celsius), and the temperature difference between cells is controlled within 5(degrees Celsius). If the temperature exceeds safe limits, the BMS will trigger alarms and protective actions.
Send Inquiry
*To:
WindSun Science & Technology CO.,Ltd.
WindSun Science & Technology CO.,Ltd.*Content:
Supplier replies will be sent to your registered email
You may also like
125kw 261kwh Liquid-Cooled Energy Storage System for Industrial & Commercial
US$31,720.00
1 Piece(MOQ)
High Performance Industrial Battery Storage Solution Cabinet for Business
US$38,331.00
1 Piece(MOQ)
Professional 125kw/261kwh Liquid-Cooled Ess for Industrial Energy Storage Cabinet
US$23,000.00-50,000.00
1 Set(MOQ)
Efficient 125kw/261kwh Liquid-Cooled Ess for Industrial Renewable Battery Storage
US$23,000.00-50,000.00
1 Set(MOQ)
125kw Bidirectional Inverters Liquid Cooled Battery Storage for Back up
US$18,888.00-33,427.00
1 Piece(MOQ)
Premium 125kw/261kwh All-in-One Ess for High End Commercial Bess Storage Units
US$23,000.00-50,000.00
1 Set(MOQ)
Fgi 261kwh Commercial Battery Storage Solution with 125kw Power Conversion System for Factory Load Management
US$23,000.00-50,000.00
1 Set(MOQ)
Commercial Use 261kwh Liquid Cooled Battery Energy Storage Solution Cabinet
US$18,888.00-33,427.00
1 Piece(MOQ)
Durable Outdoor Air Cooled Bess Energy Storage Power Station Unit
US$38,331.00
1 Piece(MOQ)
Advanced Liquid Cooled Energy Storage Cabinet 261kwh for Industrial Application
US$18,888.00-33,427.00
1 Piece(MOQ)
Advanced Liquid Cooled Energy Storage Solution 261kwh with Bidirectional Inverters
US$18,888.00-33,427.00
1 Piece(MOQ)
Atess PCS 5mwh 10mwh Bess Solution for Large Scale Solar Battery Energy Storage
US$0.39-0.45
1 Piece(MOQ)
Energy Storage System 125kw 261kwh with Hybrid Inverter for Backup Power
US$27,000.00-30,000.00
1 unit(MOQ)