Powered by Made-in-China.com
Acrel Adf400L-21d Multi-Circuits Power Meter Centralized Installation, Centralized Management 21 Circuits Single Phase 10 (80) a
US$414.40
1 Piece
Product profile
Customization
AvailableAfter-sales Service
2 YearsWarranty
2 YearsModel NO.
ADF400L-21DDisplay
DigitalTheory
Electronic MeterInstallation
Direct ConnectedElectric Equipment
Three Phase Four WirePower Meter Connection
TerminalTrademark
AcrelOrigin
ChinaKey features
Multi-Circuit Measurement: Supports up to 12 three-phase or 36 single-phase direct access measurement with flexible module combination.
High Accuracy Class: Features 0.5s level measurement accuracy for precise energy monitoring.
Comprehensive Data Monitoring: Measures voltage, current, power, power factor, frequency, and harmonic content up to 31st order.
Flexible Communication: Supports RS485, Infrared, and Ethernet interfaces with Modbus-RTU and Modbus-TCP protocols.
Advanced Control Functions: Includes prepaid agreement, time control, negative control, and malignant load identification.
Robust Hardware Design: Features 8-digit LCD display with backlight and programmable button interface.
Customization Available: Offers full customization, minor customization, and flexible customization from samples or designs.
Company profile
CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 4 Years CertifiedNearest Port: Shanghai PortAverage Response Time: ≤5.15h
AI-Powered supplier vetting
SummaryThe supplier demonstrates broad electrical, power-electronics, automation, IoT, software, and related equipment business coverage. It has documented procedures for corrective and preventive actions, complaint handling, supplier-service assessment, and finished-product inspection. Its capabilities include 3D software design, ODM, SDK provision, new-product development, extensive customization, SMT/DIP production, automated sensing, debugging, and testing. Overseas support is available through agents or branches in Singapore, including installation, training, repair, maintenance, and debugging. However, the supplier has no reported in-stock capacity, overseas warehouse, overseas showroom, or valid manufacturing-capacity contract with related subcontractors. Evidence is insufficient for certification holding and customer cases.
Supplier typeThe stated business scope covers electrical signal equipment, power-electronic components, instruments and meters, software, intelligent equipment, lighting, IoT and information-security devices, charging stations, power-distribution control equipment, and industrial automation systems. Its facilities include SMT and DIP assembly lines plus automatic sensing, debugging, and testing equipment, indicating a manufacturer and technical equipment supplier rather than a purely trading-oriented entity.
After-Sales capabilityThe supplier has documented complaint-handling and corrective/preventive-action procedures with records, and overseas service capability through agents or branches in Singapore covering installation, training, repair, maintenance, and debugging. However, it reports no overseas warehouse and no overseas showroom; these are logistical limitations but do not negate the documented service functions.
R&D capabilityThe supplier provides 3D software design, ODM, SDK access, and multiple forms of customization, and reports new products during the past year. Nevertheless, it states that it has not established an AI model for big-data processing and decision-enabled management, which is a stated sustainability and digital-management gap rather than proof of insufficient product innovation.
Production capacityProduction evidence includes SMT and DIP assembly lines, automatic electricity-sensor production, and automatic debugging and testing equipment; finished-product inspection instructions are uniformly followed. Lead times are stated as within 15 workdays in both peak and off-seasons, but the supplier reports no in-stock capacity and no valid manufacturing-capacity contract with related subcontractors, limiting evidence of flexible or backup capacity.
Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, flexible customization, 3D software design, and ODM services. These combined statements provide direct evidence of broad customization and design-development capability.
Product Q&A
Q:What is the warranty period for this meter?
A:
We provide a 2-year warranty covering after-sales service for the ADF400L series.
Q:Can this meter support both direct and transformer access?
A:
Yes, it supports direct access (3*10(80)A) and transformer access (3*1(6)A) with flexible module combinations.
Q:What communication protocols are supported?
A:
The meter supports RS485 (Modbus-RTU), Infrared, and Ethernet (Modbus-TCP/TCP/IP) interfaces.
Q:Is customization available for this product?
A:
Yes, we offer full customization, minor customization, and flexible customization based on samples or designs.
Q:What is the minimum order quantity?
A:
The minimum order quantity is 1 piece.
Send Inquiry
*To:
ACREL CO., LTD.
ACREL CO., LTD.*Content:
Supplier replies will be sent to your registered email
You may also like
GF311 Fits Three Phase Four Wire Power Circuits
US$70.00
1 Piece(MOQ)
Large Concrete Mortar Architectural House Printing Structural Modeling for Building 3D Printer
US$43,000.00-45,000.00
1 Piece(MOQ)
High Precision Lab Experimental Tabletop Concrete Mortar Research & Development 3D Printer
US$23,000.00-25,000.00
1 Piece(MOQ)
Lab Cost-Effective High Precision Single Channel Ribbon Microscope Slide Printer
US$2,900.00-3,690.00
1 Piece(MOQ)
Medium Concrete Mortar Structural Engineering Construction 3D Printer
US$14,000.00-19,000.00
1 Piece(MOQ)
Tabletop Concrete Mortar 500mm Dimension Lab Additive Manufacturing Test 3D Printer
US$23,000.00-25,000.00
1 Piece(MOQ)
Roundfin Rd-T10 Thermal Transfer Slide Printer for Labels
US$3,150.00
1 Piece(MOQ)
Lab 2.5-4s High-Speed Marking Machine 4 Channel Laser Embedding Cassette Printer
US$5,900.00-6,900.00
1 Piece(MOQ)
Roundfin Rd-UVC600 Versatile Cassette Printer for Professional Use
US$7,450.00
1 Piece(MOQ)
Ysd Laboratory Instrument Multi-Mode 4-Slot Cassette Laser Printer UC-160
US$5,900.00-6,900.00
1 Piece(MOQ)
Lab Precise Text Barcodes or 2D Codes Printing Single Channel Slide Label Printer
US$5,500.00-7,500.00
1 Piece(MOQ)
Laboratory-Grade UV Laser Printer for Medical Slide Marking
US$7,450.00
1 Piece(MOQ)
GF211d Phasor Measuring Instrument Identify Inductive Capacitive Load
US$100.00
1 Piece(MOQ)
2" Accuracy Total Station Hi-Target Zts-421L10/Hts-521L10 with Cheap Price and Color Screen Land Surveying Instruments
US$1,050.00-1,200.00
1 Piece(MOQ)
2" Accuracy Total Station Hi-Target Zts-420L8 with Cheap Price and Color Screen Land Surveying Instruments
US$950.00-1,050.00
1 Piece(MOQ)
SKF Tksa 31 Basic Wired Laser Shaft Alignment Tool
US$4,480.00-4,780.00
1 Set(MOQ)



















