for Metal Cutting Customized for Plate Tube Fiber Laser Cutting Machine with Automatic Loading and Unloading System

It is designed for high-speed metal cutting, including: Carbon/Mild Steel: Up to 25mm Stainless Steel: Up to 20mm Aluminum: Up to 16mm Brass & Copper: Up to 10mm (Note: Maximum cutting thickness depends directly on the laser power source you select, from 1.5kW up to 12kW+).

Selection depends on your average material thickness and production volume:1.5kW - 2kW: Best for thin sheets (6mm mild steel, 3mm stainless). Highly economical for light fabrication. 3kW - 4kW: The most popular choice for general metal workshops. Fast cutting up to 12mm mild steel and 6mm stainless. 6kW and above: Ideal for heavy industrial use, processing thick plates (16mm) with maximum speed and clean edges.

Our machines utilize CypCut (or Beckhoff), the most reliable and user-friendly laser control system in the industry. It supports standard formats like DXF, PLT, and AI. It features Auto-Nesting to maximize sheet utilization and minimize material waste. The interface is highly intuitive; a basic operator can master it within 2 days through our video tutorials.

We ensure a hassle-free setup and reliable operation through: Pre-delivery Guidance: Complete foundation plans, electrical specs, and gas requirements sent in advance. Lifetime Support: 24/7 troubleshooting and technical support via WhatsApp, WeChat, or Zoom. Easy Setup: Step-by-step video installation guides. On-site engineer dispatch for physical training is also available upon request.

Compared to older laser technologies, fiber lasers require very minimal maintenance: Daily: Check and clean the protective lens of the laser head; empty the slag collector; check the gas pressure. Weekly: Clean dust and debris from the linear guide rails and rack-and-pinion rails, then apply fresh lubricant. Monthly: Inspect the water chiller to ensure the cooling water is clean and at the correct level (we recommend changing the distilled water every 3 months).