Continuous Operation Automatic Hydraulic Oil Purifier Machine with Centrifugal Separation

The product specifications for the ATA-GT-150E are as follows: Oil Viscosity Range: <=680 mm2/s Flow Rate: No.46 oil>=100 L/min | No.32 oil>=150 L/min Power Supply: 4 kW, AC380V 50Hz, 3-Phase 5-Wire Operating Pressure: 0.5 MPa Cleanliness Level: <=NAS 7 grade (after purification) Moisture Content: <=0.10% (after purification) Gas Content: No free gas (after purification) Dimensions: 1323 x 760 x 1049 mm Weight: 340 kg

The system uses a high-speed centrifuge drum spinning at 2930 rpm. This creates strong centrifugal force to quickly separate heavy solid particles and free water from the lighter oil. At the same time, a vacuum system removes dissolved gases and moisture. This joint action achieves continuous liquid-solid-gas separation without using any filter elements.

No, one of its biggest benefits is that it requires zero filter replacements. The machine collects dirt and sludge directly inside the spinning drum, which holds over 1 kg. Instead of buying and changing expensive filters, operators simply clean out the drum from time to time, saving you a lot of money on maintenance.

For typical No. 46 hydraulic oil, the ATA-GT-150E can purify dirty oil down to a highly clean state of NAS 7 or better. It also reduces moisture levels to 0.10% or less and completely removes free gas. This protects critical valves, prevents pump damage, and extends the life of both your machinery and your oil.

This model is specially engineered for high-viscosity applications. It provides online bypass purification for various mineral-based and synthetic industrial lubricants, including hydraulic oil, turbine oil, and heavy gear oils with viscosities up to 680 mm2/s. For smaller oil reservoirs with lower viscosities (220 mm2/s or less), our compact model, the ATA-GT-60E, is recommended.