High-Efficiency Fine Filtration Explosion-Proof Hydraulic and Turbine Oil Filtering Equipment for Power Generation

The standard specifications for this specific model are as follows: Explosion-Proof Rating: Exde IIB T4 Gb / Ex dbeb IIB T4 Gb Flow Rate: 18 L/min (1080L/H) Motor Power: 0.75 kW Operating Voltage: AC380V 50Hz, three-phase, four-wire Operating Pressure: 0.5 MPa Filter Element Model: M100-H114 (Cellulose) Element Quantity: 6 pieces Filtration Efficiency: Beta 3 = 929 Dimensions: 1236 x 454 x 1256 mm Weight: 139 kg

This model is mandatory for hazardous areas with explosive gas risks. It features official whole-machine explosion-proof certifications (Exde IIB T4 Gb / Ex dbeb IIB T4 Gb), eliminating sparking risks from standard electronics. It is ideal for online oil purification in: Petrochemical plants and oil refineries Chemical manufacturing facilities Offshore oil and gas platforms Industrial painting and spraying workshops (Note: Approved for all surface industrial gas zones; not for underground coal

CS-SU103-2RBEx is optimized for a wide spectrum of mineral-based and synthetic industrial oils, including hydraulic oils, turbine oils, lubricating oils, gear oils, compressor oils, and bearing oils.

The purifier hooks directly up to your machine's main oil reservoir in a bypass loop. It draws dirty oil from the bottom of the tank, processes it through the 6 high-precision cellulose elements at 18 L/min, and pumps ultra-clean oil back into the top of the tank. Because it operates independently of the main high-pressure hydraulic/lubrication system lines, you achieve continuous online purification with zero impact on machine uptime.

Yes. The M100-H114 cellulose elements have excellent water-absorbing properties. As oil flows through the filter layers, it efficiently traps both free and dissolved water (like moisture caused by temperature changes). Each element can hold up to 200cc of water, giving the 6-element system a total moisture capacity of 1200cc per filter change.