High Precision Equipment Protection Hydraulic Oil Filter Machine for Industrial Hydraulic Power Unit

The standard specifications for this specific model are as follows: Flow Rate: 30 L/min Motor Power: 0.75 kW Operating Voltage: AC380V 50Hz, three-phase, four-wire Operating Pressure: 0.5 MPa Filter Element: M300-H114, Beta 3=929 Dimensions: 950 x 580 x 1428 mm Weight: 214 kg

The standard CS-SS305-1RC is designed for online precision purification of standard mineral-based and synthetic industrial oils, such as hydraulic oil, turbine oil, and gear lubricants used across equipment hydraulic and lubrication systems.

Standard full-flow inline filters rely on surface interception that only catches coarse solid particles and cannot remove moisture or oxidation sludge. Our Japanese 3R filters feature a special structure that performs multi-stage filtration. It absorbs free/dissolved water, adsorbs acidic oxidation sludge, and captures micro-impurities with a specialized beta3=929 absolute efficiency rating.

The machine features an oil-filled pressure gauge to track element saturation. At a stable operating oil temperature, a pressure reading of 0.35 MPa or below indicates that the elements are fully saturated and require immediate replacement.

Yes. The cellulose fibers within the filter elements have excellent moisture absorption capabilities. It efficiently removes free and dissolved water (such as condensation water caused by temperature differences), bringing highly contaminated oil back to a clean, safe, and deeply dried state that meets strict industrial machinery operating standards.