1000cc Water Absorption Capacity Precision Hydraulic Oil Filter Element for Nas 3 Cleanliness & Sludge Removal

The M300-H114 filter element is specifically designed for mineral and synthetic industrial oils. It operates efficiently in hydraulic oil, lubricating oil, and turbine oil systems with a viscosity range up to ISO VG 100 (below 100 cSt at 40 degrees Celsius).

The M300-H114 features ultra-precision filtration with a standard rating of beta3=929. It removes 99.89% of particles sized 3 microns or larger, successfully restoring oil quality to NAS 3-7 cleanliness standards.

Yes. The M300-H114 is constructed from special absorbent cellulose fibers capable of absorbing up to 1000cc of water per element, effectively removing moisture caused by temperature condensation.

Yes. The dense micro-fiber matrix captures fine oxidation byproducts, insoluble sludge, and varnish-forming resinous substances (0.1-1 micron), suppressing acid value rise and extending oil service life.

As the element traps contaminants, internal pressure increases. Replace the element when the pressure rises 0.10-0.15 MPa above its initial reading. Note: Pressure readings may also spike temporarily during cold equipment startups due to low oil temperature. Service life directly depends on oil contamination levels and maintenance standards.