Powered by Made-in-China.com
Durable Rubber Dam for Efficient River Diversion and Control
US$3,000.00
1 Square Meter
Product profile
Usage
AgriculturalMaterial
EPDMSpecies
Water-Filled and InflatableModel NO.
BICApplication
Low Head, Long Span Dam ProjectOther Titles
Rubber SluiceTime of First Occurrence
The Year 1957Maximum Height
6mTransport Package
ContainerTrademark
BICOrigin
ChinaHS Code
4016950090Production Capacity
1500 PCS / YearKey features
Cost Efficiency: Total investment cost is 30-40% lower than conventional gated regulating structures.
Flood Flow Optimization: Spans up to 100 meters without dividing piers, providing full width active cross-section.
Material Durability: Constructed with EPDM material for long-lasting performance in water environments.
Foundation Adaptability: Adapts to differential settlement, reducing foundation soil treatment to nominal or none.
Rapid Installation: Construction and installation are quicker compared to conventional gated regulating structures.
Low Maintenance: Features low operation and maintenance costs for long-term savings.
Material Savings: Saves huge amounts of steel, cement, timber, and other construction materials.
Production Capacity: Annual production capacity of 1500 sets to meet high demand.
Company profile
Business Type: Manufacturer/Factory, Group CorporationExport Year: 1994-01-01Nearest Port: TIANJIN, QINGDAO, SHANGHAIAverage Response Time: ≤2.55hTerms of Payment: LC, T/TInternational Commercial Terms(Incoterms): FOB, CFR, CIF
AI-Powered supplier vetting
SummaryBeijing IWHR Corporation is identified as a China-based state-owned manufacturer/factory and group corporation, with 148 employees and valid import-export licensing. It provides extensive customization, has introduced new products within the past year, and offers an SDK, indicating established development capabilities. ISO 9001 and ISO 14001 certifications, 50 quality-control staff, and documented procedures for supplier assessment, corrective actions, and complaint handling support its quality-management and service processes. The supplier has exported for 30 years and reports that exports represent 41%–50% of total sales. However, it reports no inventory capacity, overseas warehouse, overseas showroom, or ODM service, while environmental assessment, fire-drill status, and trade-volume information are unspecified. No explicit customer cases are provided.
Supplier typeThe supplier is described as a manufacturer/factory and group corporation, with a separate entry also identifying it as a trading company. It is a state-owned limited company based in Beijing, China, with 148 employees and valid import-export licensing; the mixed classification should be clarified during due diligence.
CertificationsThe supplier holds ISO 9001 and ISO 14001 certifications. These explicitly support quality-management and environmental-management system credentials.
After-Sales capabilityThe supplier has documented procedures and records for handling customer complaints, as well as corrective and preventive actions, and it can provide services through overseas agents or branches. However, it lacks overseas warehouses and showrooms, so its after-sales infrastructure is documented but not comprehensive.
R&D capabilityThe supplier reports new products within the past year, has an available SDK, and has 21–30 years of total R&D-engineer experience. Its described activities also include R&D and system integration, providing explicit evidence of substantial innovation resources.
Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization. These repeated listings demonstrate broad customization coverage, although ODM service and OEM service for popular brands are not provided.
Product Q&A
Q:How does the hydraulic elevator dam operate? What is the lift time and drop time? Can the water be blocking at any height?
A:
The back side of the hydraulic elevator dam is supported by two hydraulic cylinders at a small Angle, powered by the hydraulic station, and the hydraulic oil is used as the medium to make the cylinder rod of the hydraulic cylinder move, so as to realize blocking and discharging flood. The lifting time of single gate is about 1min/m, and the lowering time can be adjusted in 30s-30min. The hydraulic elevator dam can achieve arbitrary dam high water retention.
Q:How does the dam work if sedimentation on top of its surface is more than 30 cm?
A:
The hydraulic elevator dam is able to withstand severe mud and sand sedimentation. It was specially designed for this purpose. The hydraulic dam may be adjusted up to a vertical angle of 75 degrees. This angle is large enough to completely wash away sedimentation under normal flow conditions. If sedimentation is not completely removed, the remainder will not be significant enough to affect the lifting and the dropping of the dam.
Q:What should be done if branches and stones are stuck in the dam?
A:
There may be large quantities of floating objects, such as tree branches, plastic bags, etc., which may serve as impediments to the normal operations of the hydraulic dam. Based on the quantity and location of these floating objects, regulation of a single dam or coordination with adjacent dams may be used for tackling this problem. These floating objects will eventually drift away with the help of the water flow. If stones are stuck in between the two dam surfaces, the dam's angle may be adjust
Q:Is it possible to lift and drop the dam at the same time?
A:
We can custom design the hydraulic pump station to achieve synchronous lifting and dropping of the dam 's surface. Importantly, if the flow and the power of the hydraulic pump are enhanced to accommodate the special needs of customers, the cost of the dam will also increase.
Send Inquiry
*To:
Beijing IWHR Corporation
Beijing IWHR Corporation*Content:
Supplier replies will be sent to your registered email
You may also like
Flexible Rubber Dams for Efficient Water Flow Control Solutions
US$3,000.00
1 Square Meter(MOQ)
Shield Rubber Dam for River Flow Control and Water Storage
US$5,000.00-15,000.00
1 Piece(MOQ)
Durable Hydro Power Rubber Dam Bladder for River Weirs
US$3,000.00
1 Square Meter(MOQ)
A001 Site Customized Air Shield Dam for Water Diversion System
US$550.00-1,500.00
1 Square Meter(MOQ)
Inflatable Rubber Dam for Efficient Control of River Flow
US$10,000.00-50,000.00
1 Piece(MOQ)
Durable Rubber Dam for Air and Water Control, 15-25 Years
US$3,000.00
1 Square Meter(MOQ)
Durable Adjustable Anti Flood Barrier Inflated Air and Water Filled Water Fin Spoiler Rubber Dam Weir Dam for River Water
US$499.00-50,000.00
1 Piece(MOQ)
Rubber Dam for Flood Control and River Management
US$10,000.00-50,000.00
1 Piece(MOQ)
Premium Inflatable Rubber Dam for Durable Water Control
US$3,000.00
1 Square Meter(MOQ)
A001 Automated Control Air Shield Dam for Water Conservancy
US$550.00-1,500.00
1 Square Meter(MOQ)
A001 Modular Air Shield Dam for River Regulation
US$550.00-1,500.00
1 Square Meter(MOQ)
Economical Inflatable Bookend Rubber Dam Anti-Flood Barrier Easy Installation for Water Management and River Control
US$499.00-50,000.00
1 Piece(MOQ)
Water Filling Rubber Water Dam for Flood Control and River Regulation
US$10,000.00-50,000.00
1 Piece(MOQ)
Inflatable Rubber Flood Dam - Waterproof Water Stopper for Rivers/Reservoirs
US$50.00-100.00
10 Pieces(MOQ)
Inflatable Rubber Dam for River Flood Control
US$1,000.00
10 Meters(MOQ)
Durable Silicone Water Dam for Shower and Bathroom Use
US$1.70-2.90
500 Meters(MOQ)
Colored UV-Resistant Rubber Dam for Municipal River Landscape
US$50.00-100.00
10 Pieces(MOQ)
Silicone Water Dam for Shower and Kitchen Use
US$1.70-2.90
500 Meters(MOQ)

















