How many alarm outputs can be configured?

Up to 3 alarm outputs can be configured, with 17 different alarm modes available.

Is the configuration secure against unauthorized changes?

Yes, it features a 4-digit security code and two configuration levels to prevent unauthorized access.

Honeywell DC1020CR-302000-E General Purpose Digital Controller

Name: Honeywell DC1020CR-302000-E General Purpose Digital Controller
Brand: BNSENS Co., Ltd.
SKU: 2304427695

Jiangsu, ChinaBNSENS Co., Ltd.

US$1.00-19.00

1 Piece

Sample price:US$5.00/piece.Request sample

Product profile

Customization

Available

Task

Adjust

Signal

Continuous

Model NO.

DC1020CR-302000-E

Function

Automatic Control

Customized

Non-Customized

Type of Input

Thermocouples : K, J, R, S, B, E, N, T, W, PL II,

Input Sampling Time

250 ms

Input Resolution

14 bit (each)

PV/SP Indication

4-digit, 7 segment display

Constant Value Storage System

Non-volatile memory (EEPROM)

Indication Accuracy

+/-0.2%FS

Proportional Band ( P )

0~200% (On/Off action at P=0)

Integral Time ( I )

0~3600 sec (PD action at I=0)

Derivative Time ( D )

0~900 sec (PI action at D=0)

Cycle Time

0~150 sec (4~20mA=0, SSR=1, Relay=10)

Dead Band Time

0~1000 sec (dead time compensation)

Static relay driver output

Voltage Pulse, 20VDC/20mA

Current & Voltage outputs

0~20mA, 4~20mA, 0~5V, 0~10V, 1~5V, 2~10V

Motor Control Output

Servo motor valve control (open loop circuit)

Output Signal

SP, PV

Transport Package

Carton

Trademark

Honeywell

Origin

China

Key features

Advanced Control Algorithms: Supports PID, ON/OFF, Heat/Cool, Phase Angle, Zero-Crossover, and Motor Position Control.

Dual Display & Bargraph: Features two 4-digit displays for PV/SP and a 10-LED green bargraph for output percentage.

Flexible Input Types: Accepts Thermocouples (K, J, R, S, B, E, N, T, W, PL II, U, L), RTDs, and linear signals.

Built-in Autotuning: Includes automatic tuning capability to optimize control performance without manual adjustment.

Multiple Communication Options: Offers RS232 or RS485 Modbus RTU/ASCII for connecting up to 30 controllers to a host.

Comprehensive Alarm System: Supports up to 3 alarm outputs with 17 configurable alarm modes including deviation and timer alarms.

Universal Power Supply: Operates on 85-264 Vac, 50/60 Hz with an optional 24 Vdc power supply option.

Secure Configuration: Features two configuration levels protected by a 4-digit security code to prevent unauthorized changes.

Company profile

Importers and ExportersFast DeliveryQuality Assurance100% Finished Products Inspection

BNSENS Co., Ltd.

Jiangsu, China

Business Type: Manufacturer/FactoryAverage Response Time: ≤2.81h

AI-Powered supplier vetting

SummaryBNSENS Co., Ltd. is identified as a Chinese manufacturer/factory in Jiangsu specializing in sensors and transmitters for pressure, level, temperature, flow, current, switching, and position applications. The supplier describes MEMS and independently developed ASIC expertise, a U.S.-based R&D center, and supply or cooperation relationships involving Emerson, SICK, TSMC, Siemens, Infineon, and Rohm. Its products are reported as serving multiple industrial sectors, and an audit was conducted by BV; however, the audit result and type are provided only as codes, so certification or compliance conclusions cannot be made. Information on after-sales service, financial credibility, quality systems, customization, sustainability, and several R&D services is insufficient. The stated registered capital is omitted from this assessment for privacy.

Supplier typeThe supplier is explicitly identified as a Manufacturer/Factory and a high-tech enterprise specializing in sensor development, manufacturing, and trade. Its stated business scope is Electrical & Electronics, and its listed products cover multiple sensor and transmitter categories.

R&D capabilityBNSENS describes a sensor R&D center in Minnesota, core MEMS-chip technology, independently developed ASIC chips, German-origin production-line introduction, and development of additional industrial-control sensors. These statements provide explicit evidence of R&D and technology activity, although the scope and verification of the capabilities are not further documented.

Production capacityThe supplier is classified as a factory and states that it develops and manufactures a broad range of sensor products. Its history includes a sensor production-line introduction and factory relocation, while reported use across oil, gas, power, chemical, metallurgy, food, environmental protection, aerospace, and municipal applications supports production experience; actual capacity, equipment scale, and output data are not provided.

Client casesThe supplier reports that its products are used across numerous industries and cites relationships or sales involving Emerson, SICK, TSMC, Siemens in Vietnam, Infineon, and Rohm. These are explicit customer or business-cooperation claims, but the slices do not provide project details, order scope, duration, or independently verified case evidence.

Product Q&A

Q:What control algorithms does the DC1020 support?

It supports PID, ON/OFF, Heat/Cool with two independent PID sets, Phase Angle, Zero-Crossover, and Motor Position Control.

Q:What types of input signals are compatible?

Compatible inputs include Thermocouples (K, J, R, S, B, E, N, T, W, PL II, U, L), RTDs (Pt100, JPt100, JPt50), and linear signals (4-20 mA, 0-20 mA, etc.).

Q:Can the controller be connected to a host computer?

Yes, via optional RS232 or RS485 Modbus RTU/ASCII, allowing up to 30 controllers to connect to a single host.

Q:Does the device have an autotuning feature?

Yes, it includes a built-in autotuning capability for automatic parameter optimization.

Q:What are the available DIN sizes?

The controller is available in four DIN sizes: 1/16 DIN, 1/8 DIN, 3/16 DIN, and 1/4 DIN.