SourcingAI
Try for free
Powered by Made-in-China.com
Honeywell HH490-1-2USB-C Handheld 2D Area-Imaging Scanner
US$1.00-399.00
1 Piece
Sample price:US$49.00/piece.Request sample

Product profile

Customization

Available

Interface Type

USB

Input Voltage

5 ± 0.5VDC

Model NO.

HH490-1-2USB-C

Operating Power

2 W (400 mA @ 5V DC)

Standby Power

0.55 W (110 mA @ 5V DC)

Host System Interfaces

USB, RS-232

Operating Temperature

0°C to 50°C (32°F to 122°F)

Electrostatic Discharge (ESD) (Scanners

±8 kV indirect coupling plane, ±15 kV direct air

Humidity

0% to 95% relative humidity, non-condensing

Environmental Sealing

IP40

Light Levels

0 to 100, 000 lux (9, 290 foot candles

Scan Pattern

Area Image (1280 x 800, pixel array)

Motion Tolerance

up to 75 cm/s for 13 mil UPC at optimal focus

Scan Angle

Horizontal: 48° nominal Vertical: 30° nominal

Roll, Pitch, Skew

±180°, ±60°, ±65°

Transport Package

Carton

Specification

72.5mm×125mm×154mm

Trademark

Honeywell

Origin

China

Key features

High-Speed 1D/2D Scanning: Reads damaged or obscured barcodes rapidly using 1GHz MCU and 1MPx global shutter camera.
Easy Configuration: Equipped with EZ Config and POS drivers to simplify setup and integration with existing systems.
Wide Application Versatility: Ideal for retail, hospitals, hotels, and schools; reads 1D, 2D, PDF, and DotCode symbology.
Cost-Effective Compatibility: Fully backward-compatible with HH400 accessories, reducing costs and protecting original investment.
Intelligent Software Support: Supported by OPOS/JPOS drivers, POSNET4, SMU, and plug-ins for seamless equipment integration.

Company profile

BNSENS Co., Ltd.
Importers and ExportersFast DeliveryQuality Assurance100% Finished Products Inspection
BNSENS Co., Ltd.Jiangsu, China
Business Type: Manufacturer/FactoryAverage Response Time: ≤2.69h

AI-Powered supplier vetting

SummaryBNSENS Co., Ltd. is identified as a Chinese manufacturer/factory in Jiangsu specializing in sensors and transmitters for pressure, level, temperature, flow, current, switching, and position applications. The supplier describes MEMS and independently developed ASIC expertise, a U.S.-based R&D center, and supply or cooperation relationships involving Emerson, SICK, TSMC, Siemens, Infineon, and Rohm. Its products are reported as serving multiple industrial sectors, and an audit was conducted by BV; however, the audit result and type are provided only as codes, so certification or compliance conclusions cannot be made. Information on after-sales service, financial credibility, quality systems, customization, sustainability, and several R&D services is insufficient. The stated registered capital is omitted from this assessment for privacy.
Supplier typeThe supplier is explicitly identified as a Manufacturer/Factory and a high-tech enterprise specializing in sensor development, manufacturing, and trade. Its stated business scope is Electrical & Electronics, and its listed products cover multiple sensor and transmitter categories.
R&D capabilityBNSENS describes a sensor R&D center in Minnesota, core MEMS-chip technology, independently developed ASIC chips, German-origin production-line introduction, and development of additional industrial-control sensors. These statements provide explicit evidence of R&D and technology activity, although the scope and verification of the capabilities are not further documented.
Production capacityThe supplier is classified as a factory and states that it develops and manufactures a broad range of sensor products. Its history includes a sensor production-line introduction and factory relocation, while reported use across oil, gas, power, chemical, metallurgy, food, environmental protection, aerospace, and municipal applications supports production experience; actual capacity, equipment scale, and output data are not provided.
Client casesThe supplier reports that its products are used across numerous industries and cites relationships or sales involving Emerson, SICK, TSMC, Siemens in Vietnam, Infineon, and Rohm. These are explicit customer or business-cooperation claims, but the slices do not provide project details, order scope, duration, or independently verified case evidence.

Product Q&A

Q:What types of barcodes can the HH490 scanner read?
A:
The HH490 can read standard 1D, PDF, 2D, and DotCode symbology, including damaged or poorly printed codes.
Q:Is the HH490 compatible with existing HH400 accessories?
A:
Yes, the HH490 is fully backward-compatible with existing HH400 accessories, helping to reduce costs and protect original investment.
Q:What software tools are supported by the HH490?
A:
It is supported by Honeywell's EZ Config, OPOS/JPOS drivers, POSNET4, SMU, and various plug-ins for easy setup and integration.
Q:What are the typical applications for the HH490 scanner?
A:
It is designed for commercial environments such as retail, supermarkets, hotels, hospitals, and schools for membership identification and payment.
Q:How durable is the HH490 scanner?
A:
It is engineered to withstand 1.2m drops to concrete twice and has an IP40 environmental sealing rating.

Send Inquiry

*To:BNSENS Co., Ltd.BNSENS Co., Ltd.
*Content:
0/4000

Supplier replies will be sent to your registered email

You may also like

Honeywell Vuquest 3320g Area-Imaging Scanner
Made-in-China.com
Honeywell 1900GHD Xenon 1900g Area-Imaging Scanner
Made-in-China.com