What certifications does this product hold?

The sensor is FDA cleared and manufactured in accordance with EN ISO 13485 standards for medical devices.

What is the electrical interface type?

The sensor uses a 3.5 mm mono phone jack for electrical interface connection.

Honeywell OOM111-H Oxygen Sensor E1000974 - Medical Galvanic O2 Sensor

Name: Honeywell OOM111-H Oxygen Sensor E1000974 - Medical Galvanic O2 Sensor
Brand: BNSENS Co., Ltd.
SKU: 2284432485

Jiangsu, ChinaBNSENS Co., Ltd.

US$1.00-699.00

1 Piece

Sample price:US$699.00/piece.Request sample

Product profile

Customization

Available

Sensitivity

High

Certification

RoHS

Model NO.

OOM111-H

Customized

Non-Customized

Measurement Range

0 % ... 100 % oxygen

Nominal sensor lifetime

> 1,000,000 % volume oxygen hours

Electrical interface

3,5 mm mono phone jack

Accuracy

meets ISO 80601-2-55 requirements

Repeatability

< 1 % volume O2 at constant temperature and pres

Linearity error

< 3 % relative

Response time

< 12 s to 90 % of final value

Zero offset voltage

< 200 μV in 100 % nitrogen, applied for 5 min

Cross interference

meets ISO 80601-2-55 requirements

Influence of humidity

-0.03 % rel. per %RH at 25°C

Pressure range

0.6 bar ... 2 bar (ppO2 0 ... 1250 mbar O2

Influence of pressure

proportional to change in oxygen partial pressur

Influence of mechanical shock

< 1 % relative after a fall from 1 m

Operating temperature

0°C ... 50°C

Transport Package

Carton

Specification

approximately 28 grams

Trademark

Honeywell

Origin

China

Key features

High Accuracy & Reliability: Meets ISO 80601-2-55 with <1% repeatability and <3% linearity error.

Industry-Leading Lifespan: Nominal lifetime >1,000,000 oxygen hours, typically >2.5 years.

Fast Response Time: Reaches 90% of final value in under 12 seconds.

Medical Grade Certification: FDA cleared and manufactured according to EN ISO 13485 standards.

Enhanced Signal Stability: Low signal drift (<1% O2/month) with built-in NTC compensation.

Resistant to N2O: Designed to resist nitrous oxide interference for stable readings.

Compact & Lightweight: Weighs approximately 28 grams with a 3.5mm mono phone jack interface.

Company profile

Importers and ExportersFast DeliveryQuality Assurance100% Finished Products Inspection

BNSENS Co., Ltd.

Jiangsu, China

Business Type: Manufacturer/FactoryAverage Response Time: ≤2.28h

AI-Powered supplier vetting

SummaryBNSENS Co., Ltd. is identified as a Chinese manufacturer/factory in Jiangsu specializing in sensors and transmitters for pressure, level, temperature, flow, current, switching, and position applications. The supplier describes MEMS and independently developed ASIC expertise, a U.S.-based R&D center, and supply or cooperation relationships involving Emerson, SICK, TSMC, Siemens, Infineon, and Rohm. Its products are reported as serving multiple industrial sectors, and an audit was conducted by BV; however, the audit result and type are provided only as codes, so certification or compliance conclusions cannot be made. Information on after-sales service, financial credibility, quality systems, customization, sustainability, and several R&D services is insufficient. The stated registered capital is omitted from this assessment for privacy.

Supplier typeThe supplier is explicitly identified as a Manufacturer/Factory and a high-tech enterprise specializing in sensor development, manufacturing, and trade. Its stated business scope is Electrical & Electronics, and its listed products cover multiple sensor and transmitter categories.

R&D capabilityBNSENS describes a sensor R&D center in Minnesota, core MEMS-chip technology, independently developed ASIC chips, German-origin production-line introduction, and development of additional industrial-control sensors. These statements provide explicit evidence of R&D and technology activity, although the scope and verification of the capabilities are not further documented.

Production capacityThe supplier is classified as a factory and states that it develops and manufactures a broad range of sensor products. Its history includes a sensor production-line introduction and factory relocation, while reported use across oil, gas, power, chemical, metallurgy, food, environmental protection, aerospace, and municipal applications supports production experience; actual capacity, equipment scale, and output data are not provided.

Client casesThe supplier reports that its products are used across numerous industries and cites relationships or sales involving Emerson, SICK, TSMC, Siemens in Vietnam, Infineon, and Rohm. These are explicit customer or business-cooperation claims, but the slices do not provide project details, order scope, duration, or independently verified case evidence.

Product Q&A

Q:What are the main medical applications for this sensor?

It is used in oxygen concentrators, medical ventilators, anesthesia systems, respirators, incubators, and gas supply systems for monitoring breathing gas mixtures.

Q:What is the accuracy standard for this oxygen sensor?

The sensor meets ISO 80601-2-55 requirements, with less than 1% volume O2 repeatability and less than 3% relative linearity error.

Q:How long does the sensor typically last?

The nominal sensor lifetime is greater than 1,000,000 % volume oxygen hours, which typically translates to over 2.5 years of use.

Q:Is this sensor customizable?

No, this product is listed as Non-Customized. It is a standard medical galvanic O2 sensor from the Honeywell EnviteC Series.

Q:What is the response time of the sensor?

The response time is less than 12 seconds to reach 90% of the final value.