What safety precautions must be taken before use?

A bump check (exposure to target gas) must be performed before each use, as this sensor is used in safety-critical applications.

What is the warranty coverage for this product?

Honeywell warrants against defective materials and workmanship during the applicable warranty period, offering repair or replacement at their option.

Honeywell Oxygen Sensor OOM110 E01-00-0098

Name: Honeywell Oxygen Sensor OOM110 E01-00-0098
Brand: BNSENS Co., Ltd.
SKU: 2277199875

Jiangsu, ChinaBNSENS Co., Ltd.

US$1.00-699.00

1 Piece

Sample price:US$50.00/piece.Request sample

Product profile

Customization

Available

Type

Oxygen Sensor

Conductivity Type

Electrochemical gas sensor

Model NO.

E01-00-0098

Material

Metal

Sensitivity

High

Customized

Non-Customized

Measurement Range

0-100% oxygen

Nominal sensor lifetime

> 1,000,000 % volume oxygen hours

Initial output signal range in ambient

10 mV ... 12 mV

Electrical interface

modular jack 6P4C

Linearity error

< 3 % relative

Response time

< 12 s to 90 % of final value

Zero offset voltage

< 200 μV in 100 % nitrogen, applied for 5 min

Cross interference

meets ISO 80601-2-55 requirements

Influence of humidity

-0.03 % rel. per %RH at 25°C

Pressure range

0.6 bar ... 2 bar (ppO2 0 ... 1250 mbar O2 )

Operating temperature

0°C ... 50°C

Operating humidity

0 % ... 99 %RH non-condensing

Part number

E01-00-0098

Transport Package

Carton

Specification

approximately 50 grams

Trademark

Honeywell

Origin

China

Key features

High Accuracy & Reliability: Meets ISO 80601-2-55 standards with low cross interference from common breathing gases.

Extended Sensor Lifespan: Nominal lifetime exceeds 1,000,000 volume oxygen hours with long-term output drift < 1% vol O2/month.

Fast Response Time: Achieves 90% of final value in less than 12 seconds for rapid oxygen concentration detection.

FDA Cleared Medical Grade: Designed and manufactured according to EN ISO 13485 for use in medical ventilators and anesthesia systems.

Resistant to N2O Interference: Enhanced signal stability and resistance to nitrous oxide interference for precise medical measurements.

Made in Germany Quality: Engineered and manufactured in Germany ensuring high precision, form fit, and integrated temperature compensation.

Low Signal Drift: Minimal drift of less than 1% volume O2 per month ensures consistent performance over the sensor's life.

Company profile

Importers and ExportersFast DeliveryQuality Assurance100% Finished Products Inspection

BNSENS Co., Ltd.

Jiangsu, China

Business Type: Manufacturer/FactoryAverage Response Time: ≤2.60h

AI-Powered supplier vetting

SummaryBNSENS Co., Ltd. is identified as a Chinese manufacturer/factory in Jiangsu specializing in sensors and transmitters for pressure, level, temperature, flow, current, switching, and position applications. The supplier describes MEMS and independently developed ASIC expertise, a U.S.-based R&D center, and supply or cooperation relationships involving Emerson, SICK, TSMC, Siemens, Infineon, and Rohm. Its products are reported as serving multiple industrial sectors, and an audit was conducted by BV; however, the audit result and type are provided only as codes, so certification or compliance conclusions cannot be made. Information on after-sales service, financial credibility, quality systems, customization, sustainability, and several R&D services is insufficient. The stated registered capital is omitted from this assessment for privacy.

Supplier typeThe supplier is explicitly identified as a Manufacturer/Factory and a high-tech enterprise specializing in sensor development, manufacturing, and trade. Its stated business scope is Electrical & Electronics, and its listed products cover multiple sensor and transmitter categories.

R&D capabilityBNSENS describes a sensor R&D center in Minnesota, core MEMS-chip technology, independently developed ASIC chips, German-origin production-line introduction, and development of additional industrial-control sensors. These statements provide explicit evidence of R&D and technology activity, although the scope and verification of the capabilities are not further documented.

Production capacityThe supplier is classified as a factory and states that it develops and manufactures a broad range of sensor products. Its history includes a sensor production-line introduction and factory relocation, while reported use across oil, gas, power, chemical, metallurgy, food, environmental protection, aerospace, and municipal applications supports production experience; actual capacity, equipment scale, and output data are not provided.

Client casesThe supplier reports that its products are used across numerous industries and cites relationships or sales involving Emerson, SICK, TSMC, Siemens in Vietnam, Infineon, and Rohm. These are explicit customer or business-cooperation claims, but the slices do not provide project details, order scope, duration, or independently verified case evidence.

Product Q&A

Q:What is the measurement range of this oxygen sensor?

The sensor measures oxygen concentration in the range of 0% to 100% oxygen at atmospheric pressure.

Q:What are the intended medical applications for this sensor?

It is intended for use in oxygen analyzers for oxygen concentrators, medical ventilators, anesthesia systems, respirators, incubators, and gas supply systems.

Q:How long is the expected lifespan of the sensor?

The nominal sensor lifetime is greater than 1,000,000 volume oxygen hours, with an expected operational lifetime of over 2.5 years.

Q:What is the response time for oxygen detection?

The response time is less than 12 seconds to reach 90% of the final value.

Q:Is this sensor customizable?

No, this specific model (OOM110) is listed as Non-Customized, though Honeywell offers customization for other OEM applications.