What is the initial output signal range?

The initial output signal range in ambient air is between 13 mV and 16 mV.

What is the warranty policy for this product?

Honeywell warrants goods free of defective materials and faulty workmanship; defective items will be repaired or replaced at their option.

Honeywell Oxygen Sensor OOM202-E E1002310

Name: Honeywell Oxygen Sensor OOM202-E E1002310
Brand: BNSENS Co., Ltd.
SKU: 2279830235

Jiangsu, ChinaBNSENS Co., Ltd.

US$1.00-699.00

1 Piece

Sample price:US$50.00/piece.Request sample

Product profile

Customization

Available

Type

Oxygen Sensor

Conductivity Type

Electrochemical gas sensor

Model NO.

E1002310

Material

Nickel Silver

Sensitivity

High

Customized

Non-Customized

Measurement Range

0-100% oxygen

Nominal sensor lifetime

> 1,000,000 % volume oxygen hours

Initial output signal range in ambient

13 mV ... 16 mV

Electrical interface

3-pin (Molex® 22-11-1031)

Accuracy

meets ISO 80601-2-55 requirements

Repeatability

< 1 % volume O2 at constant temperature and pres

Linearity error

< 3 % relative

Response time

< 12 s to 90 % of final value

Zero offset voltage

< 200 μV in 100 % nitrogen, applied for 5 min

Cross interference

meets ISO 80601-2-55 requirements

Influence of humidity

-0.03 % rel. per %RH at 25°C

Pressure range

0.6 bar ... 2 bar (ppO2 0 ... 1250 mbar O2 )

Operating temperature

0°C ... 50°C

Operating humidity

0 % ... 99 %RH non-condensing

Part number

E1002310

Transport Package

Carton

Specification

approximately 28 grams

Trademark

Honeywell

Origin

China

Key features

High Accuracy and Reliability: Meets ISO 80601-2-55 requirements with low cross interference from common breathing gases.

Industry-Leading Lifespan: Nominal lifetime exceeds 1,000,000% volume oxygen hours with low signal drift under 1% per month.

FDA Cleared Medical Grade: Designed and manufactured according to EN ISO 13485 for use in medical ventilators and anesthesia systems.

Fast Response Time: Achieves 90% of final value in less than 12 seconds for real-time oxygen monitoring.

Resistant to N2O: Enhanced signal stability and product quality resistant to nitrous oxide interference.

Flexible Signal Analysis: Simple sensor signal analysis with linearity better than 3% relative between 0% to 100% oxygen.

Short Delivery Times: Engineers provide support from design to final integration ensuring rapid solution delivery.

Company profile

Importers and ExportersFast DeliveryQuality Assurance100% Finished Products Inspection

BNSENS Co., Ltd.

Jiangsu, China

Business Type: Manufacturer/FactoryAverage Response Time: ≤2.50h

AI-Powered supplier vetting

SummaryBNSENS Co., Ltd. is identified as a Chinese manufacturer/factory in Jiangsu specializing in sensors and transmitters for pressure, level, temperature, flow, current, switching, and position applications. The supplier describes MEMS and independently developed ASIC expertise, a U.S.-based R&D center, and supply or cooperation relationships involving Emerson, SICK, TSMC, Siemens, Infineon, and Rohm. Its products are reported as serving multiple industrial sectors, and an audit was conducted by BV; however, the audit result and type are provided only as codes, so certification or compliance conclusions cannot be made. Information on after-sales service, financial credibility, quality systems, customization, sustainability, and several R&D services is insufficient. The stated registered capital is omitted from this assessment for privacy.

Supplier typeThe supplier is explicitly identified as a Manufacturer/Factory and a high-tech enterprise specializing in sensor development, manufacturing, and trade. Its stated business scope is Electrical & Electronics, and its listed products cover multiple sensor and transmitter categories.

R&D capabilityBNSENS describes a sensor R&D center in Minnesota, core MEMS-chip technology, independently developed ASIC chips, German-origin production-line introduction, and development of additional industrial-control sensors. These statements provide explicit evidence of R&D and technology activity, although the scope and verification of the capabilities are not further documented.

Production capacityThe supplier is classified as a factory and states that it develops and manufactures a broad range of sensor products. Its history includes a sensor production-line introduction and factory relocation, while reported use across oil, gas, power, chemical, metallurgy, food, environmental protection, aerospace, and municipal applications supports production experience; actual capacity, equipment scale, and output data are not provided.

Client casesThe supplier reports that its products are used across numerous industries and cites relationships or sales involving Emerson, SICK, TSMC, Siemens in Vietnam, Infineon, and Rohm. These are explicit customer or business-cooperation claims, but the slices do not provide project details, order scope, duration, or independently verified case evidence.