Abrasion Protective Heat Resistant Para Aramid Cord Belt

It is used for binding, fastening, reinforcing, and abrasion protection in industrial environments, especially where friction and heat are present. Typical uses include insulation blanket lacing, securing protective sleeves, and reinforcing hot pipe protection systems.

Yes. It is designed for elevated temperature areas and is widely applied around hot zones such as engine compartments, exhaust insulation assemblies, and industrial heating equipment, provided the belt is not directly exposed to open flame for long periods.

Standard widths are commonly 5 mm to 50 mm with thickness 1 mm to 6 mm. Other sizes can be customized, including special weave density for higher wear resistance or higher load requirements.

Para aramid fiber has low elongation. With the correct size and installation tension, it offers stable fastening and does not easily loosen compared with many conventional textile straps.

It has excellent abrasion resistance, but sharp metal edges can still cut any textile product. For extreme edge conditions, we recommend using edge protection, rounded contact points, or an additional protective layer to maximize service life.