Cut Resistant Kevlar Nomex Webbing

Biaxial reinforcement means the tape is engineered to provide strength in two directions. This helps distribute loads more evenly during wrapping, clamping, or composite layup, improving dimensional stability and resistance to tearing compared with single-direction reinforcements.

Yes. It is commonly used as a reinforcement and edge binding layer for insulation blankets, heat shields, and protective covers where abrasion and tear resistance are as important as thermal performance.

Yes. The aramid reinforcement works well in composite structures. It can be laminated or impregnated with compatible resin systems. For best results, confirm resin type, cure temperature, and the required surface finish.

In many high wear applications, aramid reinforcement offers superior abrasion and cut resistance. Fiberglass tape may be more cost-effective for basic wrapping, but aramid is often chosen for edge protection and repeated mechanical contact.

Standard width is 10 mm to 300 mm and thickness is typically 0.3 mm to 2.0 mm. Custom widths, thicknesses, and roll lengths can be made for project requirements.