White Granular Organic Polymer Flocculant for RO Pretreatment

The dosage depends on the raw water turbidity. A typical range is 0.2-10 mg/L, and the optimum dosage should be determined by water-sample testing and on-site trials. Too little or too much dosing will reduce flocculation and filtration performance, so always use the minimum effective dose.

Dilute ProtecMBC1580 with reverse osmosis water or deionized water to a0.1%-1% solution before dosing, and inject it before the multimedia filter for the best filtration improvement. It is recommended to use it together with ProtecMBC1581.

It is normally packed in 25 kg bags (customizable). Store at room temperature, protected from light and moisture, with a shelf life of one year. Wear proper protective equipment and avoid contact with skin and eyes; if contact occurs, rinse immediately with plenty of clean water.