Brand New Sct-52 Split Core Electrical Transformer for Ammeter Current Measurement

A moulded case current transformer is a solid ring of steel in a plastic or resin case and can only be used when you fit the cable through the hole in the middle of the plastic/resin case. A split core current transformer is manufactured with the steel core in two pieces. This enables the core to be separated, allowing you to fit the cores around the cable without disconnecting the cables. The disadvantage with split core current transformers is that they can be larger than standard moulded case

The current transformers must be fitted and connected in the correct way or the meter will not be accurate. The current transformers are marked on two sides: 'P1' and 'P2.' 'P1' must face the mains side and 'P2' must face the load side. 'S1' must be connected to the main side of the meter and 'S2' to the load side. Refer to appropriate wiring diagram of the meter for correct connections.

The current transformers should ideally be about 80% of the normal running load, thus allowing a 20% allowance of increasing the load in the future.

For orders under 1000PCS that are not customized, delivery is provided within 3.5 days upon receiving payment. Standard orders are shipped within 6-10 days after full payment confirmation.

We accept Western Union and T/T. The terms require a 30% deposit and 70% payment before shipping. No payment collection is made; goods are delivered only after receiving full payment.