Poultry Feed Mixed Machine with CE

A: New flat die pellet mill in first use may not produce pellets, because of the low smoothness of mould and bad cooperation in new devices. After using oily material for a period, the pellet machine can run smoothly. B: The clearance between rollers and dies is too large. You can tighten the screw to narrow the gap to 1.5-2.5 mm. C: Necessary steps to update a new die or roller shell because of wear and tear caused by long-term service. D: The material is too wet or too dry, resulting in low pr

Feed pellet machine is mainly used for producing animal feed pellets. Corn, bean pulp, straw, grass, rice husk, alfalfa, wheat stalk, etc. The suitable raw materials for making feed pellets are corn stalk, peanut shells, maize straw and other farm wastes.

The moisture content should be about 12%-20%, that is to say, the minimum moisture content is not less than 12% and the materials moisture content is not more than 20%, or you will not get high quality pellets.

The raw material is wide and usually make use of the waste . such as sawdust, wood shavings, wood chips, wood logs, straw, rice husk, cotton stalk, peanut shell, bamboo, empty fruit branches, roseamary waste, other plant wastes etc.

After you decide to purchase, we will send you proforma invoice with our bank information, bring this PI to the bank, and ask to make T/T for the deposit. For single set, your machine can be ready within 7-10 working days after we getting the deposit, we will send to the port and deliver to you by sea.