High Temperature Boiler Explosion-Proof Filter Cartridge Dust Collector

Lefilter dust collector adopts high efficiency filtration technology, through the negative pressure generated by the fan to inhale the dusty gas, the dust is intercepted and filtered by the cartridge (e.g. polyester fiber, film-coated filter material, etc.), and the clean air is discharged. Some models support pulse blowback cleaning system to automatically clean the dust accumulated in the filter element to ensure long-term stable operation.

Make sure the equipment is placed horizontally and away from flammable and explosive environments. Check the voltage (e.g. 220V/380V) when connecting the power supply, and the grounding wire must be reliable. The pipe interface needs to be sealed tightly to avoid air leakage affecting the dust suction efficiency. Before the first startup, check whether the filter element is installed in place and whether the dust cleaning system is normal.

Filter cartridge life depends on the use of the environment and the nature of the dust, usually recommended: Ordinary dust: Replace every 6-12 months. High humidity, sticky dust: check/replace every 3-6 months. If a significant drop in suction power or a broken cartridge is found, needs to be replaced immediately.

Possible causes include: Clogged cartridge: clean or replace the cartridge. Air leakage from pipes or connections: check the sealing. Dust collection bucket is full: Empty and clean the filter in time. Failure of the fan: contact after-sales service to test the motor or circuit.

Check whether the equipment is placed smoothly to avoid resonance. Clean the fan impeller of accumulated dust or foreign matter. Make sure the silencer (if any) is intact. If the noise level continues to exceed the limit (>65dB), please contact technical support.