Small Reverse Osmosis Water Treatment Equipment Device Water Filter

The TDS of effluent from a single-stage RO system can typically be reduced to 10-50 ppm,with a removal rate of 97%-99% for dissolved salts.For more stringent pure water requirements,a two-stage RO or RO+EDI combined process can be used,with an effluent resistivity of over 18

1.Industrial boiler feedwater 2.USP purified water production in the pharmaceutical industry 3.Water for food and beverage processing 4.Ultrapure water cleaning for electronic semiconductors 5.Seawater/brackish water desalination 6.Hospital dialysis water 7.Municipal drinking water upgrading 8.Reclaimed water reuse and zero-discharge pretreatment

1.Membrane fouling 2.Membrane oxidation 3.Mechanical failure 4.Changes in operating conditions

Multi media filters,activated carbon filters,scale inhibitor dosing systems,security filters

If the RO system is shut down for more than 48 hours, the following protective measures should be taken to prevent microbial growth and membrane element damage: Short-term shutdown 1~7 days: Flush the membrane system with RO permeate at low pressure for 15~30 minutes every 24 hours. Long-term shutdown >7 days: Membrane elements need to be stored properly. Precautions in cold regions during winter: If the ambient temperature may drop below 0, drain all water from the piping and membrane hou