High Efficiency Weatherproof Fully Sealed Dry Transformer with Stable Performance

Adopts F/H grade epoxy resin vacuum cast insulation, non-flammable, non-combustible, no explosion risk, no toxic gas generated during short circuit faults.

Adopts high-permeability cold-rolled oriented silicon steel sheets and three-dimensional core design, no-load loss is 20% lower than national standard, load loss is 15% lower

Adopts stepped core joints, multi-layer elastic shock absorption structure and silent fans, operating noise is 8-10dB lower than national standard.

Integral vacuum casting forms a dense seamless insulation layer with protection grade up to IP30/IP54, can operate normally in environments with relative humidity below 95%.

Completely solves the heavy maintenance pain points of traditional oil-immersed transformers such as oil leakage, regular oil changes and insulating oil testing.

Built-in high-precision PT100 winding temperature sensors and intelligent temperature control system.

Real-time monitoring of three-phase winding temperature, automatic fan start/stop, over-temperature alarm and over-temperature trip.

Adopts split modular structure, 30% lighter than oil-immersed transformers of the same capacity, no large special lifting equipment required.

Contains no insulating oil, no leakage pollution risk, 100% recyclable materials such as iron core and copper winding after disposal, fully meeting environmental protection requirements.