Household Floor Standing Air Conditioner with Water Tank (JH163)

Portable air conditioner is especially well suited where the air is hot and humidity is low. However, in higher humidity areas there are many proven cost effective uses for evaporative cooling that make it the right choice, like poultry farm, industrial plants, commercial kitchens, laundries, dry cleaners, greenhouses, spot cooling etc.

Pads should be cleaned at least once a season prior to storing for the winter. In hard water areas, cleaning may be required more frequently. Periodic, visual examination is required. Remove the back or top of the cooler following the instructions in the operating manual. Look at the pads, if they show signs of heavy mineral deposits they will need to be cleaned.

Remove the pad from the unit or back panel. Rinse the pad with fresh water using a hose or soaking the pad in a tub until the mineral deposits disappear. You may want to change the tub water occasionally to accelerate the cleaning process. Allow the pad to sun dry. Reattach the pad to the cooler back panel or reinstall inside the cooler.

Pads should be changed when they no longer cool as effectively as they did when new. This generally happens when mineral deposits on the pads become so heavy that the water running over them during operation cannot be absorbed. If a pad is properly cleaned and maintained, its life can be three to five years or more. But, we advise customer replace the pad every 2 or 3 years to keep the best cooling efficiency.

The amount of water required will vary depending on the size of the water cooler air conditioner or other water air cooler you own. To help determine the correct level, each air cooler water pump from China is equipped with a water level indicator. It can be found on bottom sump of the unit. Add water until the indicator shoes that the water reservoir is filled. Water will leak from the unit if it is overfilled.