1500W Automatic Platform Laser Machine for Thin Metal Welding

The 1500W power level is optimized for thin-gauge materials in the 0.1mm to 2mm range. Stainless steel and carbon steel weld well up to 2mm, aluminum up to about 1.5mm, and thin copper sections up to 1mm. For materials consistently above 2mm, the 3000W configuration provides the deeper penetration needed.

Both machines can weld thin materials-the 3000W model can be adjusted down to lower power output. However, the 1500W configuration offers distinct advantages for shops focused on thin-gauge work: simpler 220V single-phase power installation, finer control at the lower end of the power curve, and more cost-effective pricing. If your work regularly exceeds 2mm, the 3000W provides more flexibility. If you work consistently within the 0.1-2mm range, the 1500W delivers an efficient, well-matched solu

No. This model operates on standard 220V single-phase power, making installation straightforward in most facilities. No three-phase power connection is required, unlike higher-power configurations.

With proper argon shielding and optimized pulse parameters, stainless steel welds come out bright and clean with minimal discoloration. The heat-affected zone is narrow and uniform. Visible surfaces like kitchen equipment, architectural panels, and furniture components typically need little to no post-weld polishing.

Yes. The machine can adjust and save parameters based on the material, and operators can fine-tune settings at any time through the HMI. Stainless steel welds with a different pulse profile than aluminum, and the control system manages both smoothly. We recommend sample testing to dial in the best parameters for your specific alloy.