Automatic Dedicated Process Multi-Station Laser Welding Equipment

A custom fixture multi station system is mainly built around part geometry and loading difficulty. A dedicated process multi station system is mainly built around the process route itself, especially when different stations need to perform different special tasks in sequence.

In many projects, yes, but final feasibility must be confirmed by sample review. We usually evaluate the part material, surface condition, process target, station route, and fixture logic together before confirming the final direction.

Yes. Depending on the application, stations can be reviewed for loading, positioning, main process execution, secondary process steps, transfer, or unloading. The final arrangement depends on the actual process route.

For reviewed aluminum tasks, common reference directions may include 1500W below about 1.0mm, 2000W around 1.0mm - 2.0mm, 3000W around 2.0mm - 4.0mm, and 4000W around 4.0mm - 6.0mm. For reviewed copper tasks, common reference directions may include 1500W below about 1.0mm, 2000W around 1.0mm - 2.0mm, 3000W around 2.0mm - 3.0mm, and 4000W around 3.0mm - 4.0mm. Final confirmation still depends on process validation.

Drawings, material type, thickness range, part size, target process, expected output rhythm, and any known fixture or handling difficulty are the best starting points. With those details, we can review the most practical dedicated process multi station laser welding system direction for your project.