Closed Precise 2000W Laser Welding Machine for 1-4mm Parts

The 2000W precision configuration is optimized for medium-gauge materials from 1mm to 4mm. Stainless steel welds well across this full range. Aluminum benefits from 2000W up to approximately 3mm. Copper components, due to their higher thermal conductivity, are best welded up to about 2mm at this power level. For materials consistently below 1mm, 1500W may provide finer control. For materials consistently above 4mm, higher power options are available.

The 2000W configuration occupies the middle of the precision power range. It provides deeper penetration than 1500W on 2mm to 4mm stainless steel and aluminum sections, while retaining finer pulse control than a dialed-back 3000W source. For manufacturers producing parts across the 1mm to 4mm range, 2000W offers a single-machine solution that avoids the compromises of operating at the extremes of either a lower or higher power band.

Yes. The machine can adjust and save parameters based on the material and thickness. Stainless steel and aluminum require different pulse profiles, and the 2000W configuration provides the energy and control range to handle both. Operators can switch between materials by loading the corresponding stored weld program.

Yes, for copper sections up to approximately 2mm. The 2000W energy density overcomes copper's reflectivity and thermal conductivity more reliably than 1500W, making it suitable for connectors, terminals, and bus bars in the typical thickness range for precision electrical components.

The 2000W configuration is available with either 220V or 380V power supply to match your facility's electrical infrastructure. We can specify the appropriate configuration based on your installation requirements.