Custom Label Flexible Fixture CDU Component Laser Welding Machine For Aluminum Thermal Machining

Yes, in many CDU production projects it can. Stainless steel and copper require different parameter settings, and copper usually needs closer power planning because of reflectivity and thermal conductivity. We recommend confirming both materials through sample welding when your project includes more than one CDU material type.

As a practical reference, 2000W is commonly used for copper sections around 1mm - 2mm, while 3000W is more suitable for thicker copper sections around 2mm - 3mm or for parts with longer seam routes and higher heat mass. Final selection should follow your actual part geometry and output target.

Typical parts include CDU housings, covers, connector sections, perimeter seams, and copper flow-related parts. If your components include more unusual forms or restricted seam access, we can review fixture direction through the platform before quotation.

Yes. Standard CDU parts can often use regular workholding, but non-standard covers, copper blocks, or connector-area joints may benefit from project-based fixture design. We can review that during the sample stage.

Please send your part drawings and acceptance method through the platform before testing. We do not default to leak-proof or hermetic claims without reviewed evidence, but we can align the sample welding review with your own inspection flow and project criteria.