Enclosed Platform Laser Welder for Small Metal Components

The machine can weld parts as small as a few millimeters, as long as the fixture can hold the component securely and the laser can access the weld location. Small connectors, terminals, and miniature brackets are common applications. We recommend sending samples to confirm the best fixturing approach for very small or delicate parts.

Yes. The control system stores multiple weld recipes, each with its own power settings, pulse parameters, and travel speed. Switching between part numbers is a matter of loading the correct program and fixture-no need to redevelop parameters each time a repeat job comes through.

The fiber laser's pulse shaping capability allows you to control how energy is delivered to the weld spot. Short, precise pulses deliver just enough heat for fusion without overheating the surrounding material. The machine can adjust and save parameters based on the material and thickness, and operators can fine-tune the settings at any time through the HMI.

With the quick-change fixture mounting system, swapping between pre-set fixtures takes just a few minutes. The operator unclamps one fixture plate, lifts it off, drops the next one into position, clamps it down, and calls up the corresponding weld program on the HMI.

The machine is suitable for stainless steel (304, 316L), carbon steel, aluminum (6061, 5052), copper (T2), and brass. Typical welding thickness ranges from 0.2mm to 2mm, with thicker sections accommodated using higher power options.