Pet Blowing Air Source Compressor 1.2/40 4 MPa Air-Cooled Piston in Stock

Two-stage reciprocating piston compression with high-efficiency valve assemblies, an integral crankcase, and intercooling plus after-cooling to reduce discharge temperature and the load on downstream air treatment.

Routine maintenance covers inspection and periodic renewal of the intake filter, compressor oil and filter elements. Recommended oil change intervals are 1,000-2,000 hours depending on model and duty cycle. Refer to the manual supplied with your unit for the exact schedule and oil grade.

The standard supply is 380V / 50Hz / three-phase. Other voltages and frequencies, and other site electrical requirements, can be confirmed at the time of order.

Low delivery is usually caused by a blocked intake filter, valve leakage or a damaged valve plate, worn piston rings, line or joint leakage, or insufficient speed from low voltage or frequency. High discharge temperature usually points to a dirty cooler, insufficient or over-warm cooling water, high ambient temperature, or valve leakage causing backflow. Abnormal oil consumption is typically worn piston or scraper rings, or an over-high oil level.

We are recruiting agents, distributors, suppliers and project partners worldwide. Policy highlights: direct supply from our own production base with no intermediary margin; competitive supply prices that leave margin to partners; and industry-exclusive agency available for qualified partners. Please contact us with your market and target industries.