Forede DN150 Flanged End Foot Valve for Piping System

Yes. The flange end (ANSI150LB/GB/BS Standard) enables connection to various pipe materials. For steel pipes, ensure the flange dimensions match. When connecting to plastic pipes (like PVC), use compatible flange adapters and check that the pipe can withstand the valve's working pressure (1.0/1.6 Mpa).

Clean the filter net every 3-6 months, or more frequently if the water source has high debris content. Remove the filter net, rinse it with clean water to remove sediment, and use a soft brush for stubborn particles. Avoid using abrasive cleaners that could damage the SS304 surface.

Operating at the maximum working pressure (1.6 Mpa) long - term can increase wear on internal components like the check mechanism. While the valve is designed for 1.6 Mpa, using 1.0 Mpa reduces stress and can extend the lifespan. Regular maintenance (e.g., checking for leaks, inspecting the valve body) is crucial for longevity at higher pressures.

The epoxy coating provides good corrosion resistance and durability for most environments. In underground installations with high moisture or corrosive soils, the coating can last 5-10 years. However, physical impacts (like heavy equipment contact) can chip the coating. For extreme environments, consider additional protective measures like wrapping the valve in corrosion - resistant tape.

Select the valve size that matches the pipe diameter to minimize pressure loss. For example, use a 4 - inch valve with a 4 - inch pipe. If the pipe diameter changes, use reducers or expanders before/after the valve, but ensure the valve size is compatible with the main flow requirements. Consult hydraulic calculations or an engineer to match flow rates with valve sizing.