What are the applicable standards for this product?

It complies with GB/T 24456-2009, YD/T 841.4-2016, and JT/T 496-2018.

Silicon Core Duct HDPE PE100 Low Friction Inner Wall

Name: Silicon Core Duct HDPE PE100 Low Friction Inner Wall
Brand: Hebei Shentong Plastic Co., Ltd.
SKU: 2326630985

Hebei, ChinaHebei Shentong Plastic Co., Ltd.

US$1.00

1,000 Meters

Product profile

Customization

Available

Warranty

Material

HDPE

Model NO.

ST2691222

Kind

Thermoplastics Pipes

Water Absorption

0.1%~0.3%

Contraction Percentage

＜0.4%

Tensile Strength

41~50MPa

Specification

32/26, 34/28, 40/33, 46/38, 50/41, 63/54 mm

Trademark

Origin

China

Key features

Ultra-Low Friction Silicone Inner Layer: Co-extruded silicone lining keeps the inner wall friction coefficient at or below 0.15 and never delaminates from the HDPE wall, even after long-term burial.

Long-Distance Cable Blowing: A single optical fiber cable can be blown 1000 2000 meters per run, cutting joint count, manhole spacing and installation time dramatically roughly 15 minutes per 100

100% Virgin PE100 Material: Excellent environmental stress crack resistance, chemical resistance and UV stability for decades of buried service.

Long Coil Length: 2,000 m per coil as standard option reduces field joints; 500 m and 1,000 m coils also available for short routes and duct-bank work.

Reusable Route: The inseparable low-friction lining supports repeated cable installation and future cable replacement in the same duct, ideal for network upgrade planning.

Full Metric Size Range: 32/26, 34/28, 40/33, 46/38, 50/41 and 63/54 mm (OD/ID), with custom sizes on request.

Standard Compliance: Manufactured and tested to GB/T 24456, YD/T 841.4 and JT/T 496 according to the target project requirement.

Company profile

High Repeat Buyers ChoiceYears of Export ExperienceExperienced TeamSelf-branded

Hebei Shentong Plastic Co., Ltd.

Hebei, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 14 Years CertifiedNearest Port: Tianjin PortAverage Response Time: ≤4.00h CertifiedTerms of Payment: LC, T/T

AI-Powered supplier vetting

SummaryHebei Shentong Plastic Co., Ltd. is a China-based factory established in 2011, with 33 employees and operations in Shijiazhuang, Hebei. The evidence indicates documented procedures for supplier service capability, corrective and preventive actions, complaint handling, and supplier assessment. It reports inventory capacity, lead times within 15 working days in both peak and off-seasons, and access to Tianjin Port. ISO9001:2015 certification is referenced, while no overseas warehouse or showroom capability and no valid manufacturing-capacity contract with an affiliated subcontractor are reported. Innovation evidence is limited: the supplier has one national science and technology progress award but no internationally recognized design awards and no available SDK. Production scope includes plastic pipe production lines and injection molding equipment, but customization capability and customer-specific case details are not sufficiently documented.

Supplier typeThe supplier is identified as a limited company and factory in China, with its operating province and city listed as Hebei and Shijiazhuang. Its stated business scope covers instruments and meters, mechanical equipment, metal products, components, materials, import and export activities, and construction-related services, indicating a manufacturing-oriented and diversified business profile.

CertificationsThe evidence explicitly references an ISO9001:2015 certificate and also states that the company has received ISO9001. Quality assurance in quality-control processes is marked as present, supported by documented procedures and records for relevant service mechanisms.

After-Sales capabilityThe supplier has documented and followed procedures for corrective and preventive actions, customer complaint handling, and supplier service-capability assessment. It also reports in-stock service capacity and lead times within 15 working days in both peak and off-seasons, but has no overseas warehouse or overseas showroom.

Production capacityThe supplier reports inventory capacity, quality assurance, and facilities associated with injection molding machines and PPR, PVC, and PE pipe production lines. Its company description also claims well-equipped facilities and quality control across production stages, while the absence of a valid manufacturing-capacity contract with an affiliated subcontractor is a documented limitation.