Tank Gauge/Ultrasonic Sludge Level Meter/Integrated Ultrasonic Level Meter

Yes, the GUT780 is designed for both liquids and bulk solids. However, solids applications require careful consideration of the surface angle and dust. For coarse solids (e.g., grains, plastic pellets, coal), it works well. For very fine, fluffy, or angled powders, please consult us for proper probe selection.

The maximum range is 60 meters for liquids. For solids (due to signal scattering), the effective range is typically reduced-generally up to 30-40 meters depending on the material. Please contact us for solid application guidance.

Yes. The probe is rated IP68, which means it is fully submersible. This is common in wells, lift stations, or flood-prone areas. The display is IP65 (water-resistant but not submersible).

Yes. The GUT780 can be ordered with programmable relays. For example, you can set relay 1 to turn on a pump when level is high, and relay 2 to turn it off when level is low. Up to 4 relays are available on the remote version; up to 2 relays on the integral version.

Analog: 4-20mA (2-wire or 4-wire) -compatible with most PLCs, displays, and SCADA systems. Relays: 250VAC/8A or 30VDC/5A-for direct pump/valve control. Digital: RS485 or RS232 with manufacturer protocol (Modbus available upon request).