High Strength Carbon Fiber Sheet

Whether or not cut edges would benefit from sealing really comes down to the application and environment where the sheet will be used, specifically, we're really talking about prolonged or permanent exposure to liquids like water, chemicals, oil etc. In an application where the cut edge of the sheet is going to be regularly or permanently exposed to liquids then it would be beneficial to seal the edge to prevent water ingress which, over enough time, can travel down the fibers and cause delamina

It's not possible to give an exact weight because it would depend on many things (how the sheet is supported, what the span in, how the weight it loaded, whether the sheet is a 'free span' (i.e. not bonded/fixed) or bonded or fixed (so you get a 'drum skin' effect). That said, you could be confident that a sheet slid over a hole such that the sheet is supported on all sides would support the weight of an average person quite easily.

You can certainly flex the 1mm sheet although it's reasonably stiff and so flexing it will require some force and it will always want to 'spring' back so it would need holding in place once curved. The sheets are not brittle and are suitable for applications where they need to be bend and held in position (to make a curve) or for applications where they will flex as part of the design.

Yes, this carbon fiber sheet comes with a blue protective film on the gloss side to protect it from scratches during storage and transport.

I'm afraid that in most situations (unless you need very large quantities) we are unable to supply our carbon fiber sheet either in a custom size or cut-to-drawing. We have produced tutorials and guidance on how to cut carbon fiber sheet yourself but if that isn't an option for your project then we would suggest contacting a company who could cut the sheet for you such as a waterjet cutter or a CNC machinist. Both of these methods can cut carbon fiber sheet quickly and accurately.