Catalytic Converter Shear Cutter Machine for Waste Auto Catalyst Shell Cutting & Dismantling

The shear cutter can complete 10-12 shearing operations per minute, quickly handle various materials, has high efficiency among similar equipment, can greatly improve production progress, and meet large-scale processing needs.

It can handle various metals and alloys used in catalytic converters, such as the metal carriers and shell materials in common automotive catalytic converters. It is also suitable for various shaped wastes in scrap car dismantling centers and steel recycling companies, such as car doors and engine hoods.

The safety performance is excellent. It is equipped with a safety protection net to prevent accidents during operation; the electrical and hydraulic systems have undergone strict safety inspections, and operate stably and reliably, fully ensuring the safety of operators.

Regularly check the connections of key parts of the equipment to ensure that there are no loose screws or falling pins; replace vulnerable parts such as blades in a timely manner according to the frequency of use; pay attention to the oil level and oil quality of the hydraulic system, and replace the hydraulic oil regularly; if problems such as oil leakage or abnormal noise of the equipment are found, stop the machine immediately for inspection and maintenance.

Common causes of failures include oil leakage due to aging oil seals, system air intake caused by loose connecting bolts at the oil inlet, etc. In case of a large number of bubbles in the oil in the fuel tank and increased noise, the oil seal can be replaced and the connecting bolt at the oil inlet can be tightened; if there is oil leakage at the joint surface of the intermediate body and the front and rear covers, just tighten the connecting screws or replace the sealing ring.