High Wetting HPMC Powder Extend Tile Adhesive Workable Time

MP-H12N19 is hydroxypropyl methylcellulose HPMC specially developed for C2E tile adhesive mortar systems.

It delivers exceptional wetting performance and reliable water-retention capacity for tile adhesive formulations.

Under high dosage condition, it greatly improves wetting property and extends workable time of C2 tile adhesive for on-site construction.

It features medium strong thickening efficiency medium strong sag resistance high wetting properties medium heat stability and medium water demand.

Appearance is fine white powder without surface treatment. Viscosity ranges 20000 to 30000cps measured by Brookfield RV at 20 rpm sp 7. Moisture content is controlled no more than 5.0 percent.

Recommended dosage accounts for 0.30 percent to 0.50 percent of cementitious material weight. It will raise water requirement of mortar, pre-test is required according to raw materials and constructio

It needs thorough pre-mixing with other dry powder components in dry mortar production. Wear gloves and avoid eye contact during material handling.

It maintains good compatibility with all Portland cements and gypsum-based products. It matches full Sidleychem admixture series and should be added separately into mixing system.

Packed in 25 kilogram or 55 pound paper bags. Store in original sealed package under dry clean environment away from heat sources.

It is non-hazardous and not classified as dangerous goods for transportation. Complete safety guidance can be found in corresponding HPMC MSDS document.