Premium Polycarboxylate Water Reducer for Enhanced Concrete Durability

Yes, PCE 1016L is specifically engineered to be fully compatible with all common AAC raw materials, including Portland cement, quicklime, gypsum, and various types of fly ash (PFA). We still recommend a compatibility test for first-time users.

The shelf life is 6 months in original, sealed containers. If the product freezes, it should be thawed at room temperature (or in a warm water bath) and then stirred vigorously until it is completely homogeneous before use. Freeze-thaw cycles may slightly affect performance, so protective storage is strongly advised.

Dilution is not generally recommended as it can affect the product's stability and performance. If dilution is absolutely necessary for your dosing system, it should be done with clean, pH-neutral water immediately before use, and the diluted solution must be used within a few hours. Please consult our technical team for guidance.

By enabling higher water reduction, it allows for the potential use of a higher proportion of industrial by-products like fly ash. Its chloride-free formula is non-corrosive, and it contributes to producing durable, long-lasting building materials, supporting sustainable construction.

Typical dosage is 0.2% - 1.5% by weight of cementitious material. The exact dosage should be determined through trial mixes based on specific raw materials, desired slurry consistency, and required final product strength.