Cahmtf Hydrogen Water Bottle Electrolysis with Platinum Plated Electrode Hydrogen Generator

It is a bottle which makes hydrogen using high pressure to dissolve hydrogen in water. The higher the pressure is, the more hydrogen will dissolve in water. When you drink water you drink hydrogen as well.

CAHMTF adopts the membrane electrode technology for hydrogen-oxygen separation with a production voltage lower than 2.5V. It uses the independently developed low-voltage hydrogen production electrolyzer for pure water (SPE-MEA technology) and the proton exchange membrane from DuPont in the US. The platinum catalyst coating won't fall off even after long-term use, and the voltage won't increase, thus ensuring the safety of water quality. Moreover, there are exhaust holes at the bottom. Oxygen is

You can test it through three methods. 1. TDS pen. If the TDS value increases before and after electrolysis, or increases significantly, it is very likely that the water cup has poor technology and other heavy metal by-products enter the water while electrolyzing hydrogen and oxygen. It is not recommended to use this kind of low-quality hydrogen-rich cup for a long time. 2. Continuously produce hydrogen in an open cup of water for 1 hour and smell the water. If the water has no strange smell, it

Platinum is a precious metal. Moreover, the production of membrane electrodes with a nano-platinum catalyst type has a technical threshold. Additionally, the American DuPont N117 is extremely expensive. Due to a series of reasons combined, the production cost of a water cup with membrane electrode technology is much higher than that of a simple proton exchange membrane type.

The device produces 3000ppb in 5 minutes and over 5000ppb in 10 minutes.