Powered by Made-in-China.com
Injection Moulding Machine China for Thin Wall Disposable Container Molding
US$40,140.00
1 Piece
Product profile
Customization
AvailableAfter-sales Service
1 Year Remote WarrantyWarranty
1 YearModel NO.
HTF-290/KSType
Preform InjectionStructure
HorizontalPlastic Type
ThermoplasticPlasticizing Way
Screw TypeClamping Way
HydraulicAutomation
AutomaticComputerized
ComputerizedCertification
CEScrew Diameter
55mmShot Size(Theoretical)
641cmInjection Rate
583GPlasticizing Capacity
271g/SInjection Pressure
585MPaScrew Speed
450rpmTransport Package
Stretch Film PackagingTrademark
HAITUOOrigin
ChinaHS Code
8477101090Production Capacity
500 Sets/Per YearKey features
Energy-Saving Servo Technology: A high-end servo system matched with internationally branded components cuts energy use while keeping every shot stable and precise for thin wall molding.
Reinforced Cast Steel Frame: Thicker, stronger cast steel mechanical components give the machine exceptional rigidity, minimizing deformation and vibration during long high speed runs.
High-Plasticizing Screw Barrel: The dedicated screw and barrel plasticize material quickly and evenly, supporting fast cycles without sacrificing melt uniformity for thin wall containers.
Strengthened Power Unit: A fully upgraded power system provides consistent, powerful drive output, keeping production steady even under continuous high-speed operation.
Quick-Cycle Hydraulic Circuit: The fast oil circuit accelerates clamping and injection movements, shortening cycle time and lifting daily output for tableware makers.
Infrared Energy-Saving Heaters: Nano infrared heating rings heat the barrel evenly with less energy, reducing running costs and stabilizing process temperatures.
Built for Thin Wall Products: Engineered specifically for disposable food boxes, bowls and lunch boxes that demand fast, precise and repeatable thin wall molding.
Nationwide Service Network: Service outlets in multiple cities provide 24-hour response, on-site repair and maintenance guidance for worry-free operation.
Complimentary Operator Training: Free training on operation, maintenance and process optimization helps your team run the machine at full capacity from day one.
Strong Production Base: With three factories over 20,000 square meters and 200+ workers, we handle batch orders with stable quality and reliable supply capacity.
Company profile
CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 8 Years CertifiedNearest Port: Ningbo PortAverage Response Time: ≤6.32h
AI-Powered supplier vetting
SummaryHaituo Machinery is an injection-molding and mechanical-equipment supplier with broad manufacturing-related business activities, including special equipment manufacturing, parts processing, mold manufacturing, machine-part sales, and equipment installation services. It provides extensive customization, 3D design, ODM, and OEM services, and reported new products during the past year. The supplier holds CE and ISO 9001:2015 certifications and has seven production lines, inventory capability, and assembly and debugging lines. However, its quality and operational controls show limitations: finished products are checked by packing staff, there is no continuous batch quantity reconciliation, and no outsourcing SOP. It lacks overseas warehouse and showroom capability, has no valid manufacturing contract with related subcontractors, employs one R&D engineer, and has no SDK. Exporting began one year ago, with exports representing 21%–30% of sales. No Fortune 500 cooperation was reported, while repeat buyers...
Supplier typeThe supplier is positioned as a machinery and industrial-equipment manufacturer and service provider. Its stated activities include special equipment manufacturing, machine-part and mechanical-part sales, mold manufacturing, parts processing, and general mechanical equipment installation, while its description specifically references injection molding machines.
CertificationsThe supplier reports CE product compliance certification and an ISO 9001:2015 management-system certificate. However, it does not have a factory environmental impact assessment report and did not conduct regular fire drills during the past year; these are sustainability and safety deficiencies but do not negate the stated certifications.
R&D capabilityThe supplier provides 3D software design, ODM, and OEM services and reports new products during the past year. However, it has only one R&D engineer and no available SDK, so the evidence supports some product-development capability but not a strong or broad innovation advantage.
Production capacityThe supplier reports seven production lines, including two assembly lines and one debugging line, and has in-stock capability. Nevertheless, it has no valid manufacturing contract with related subcontractors, no outsourcing SOP, and does not continuously reconcile quantities for each batch or mass-production run, indicating operational-control weaknesses.
Customization capabilityThe supplier explicitly supports customization from designs, minor and flexible customization, customization from samples, and full customization. It also offers 3D design services, ODM, and OEM services for popular brands, providing strong direct evidence of broad customization capability.
Product Q&A
Q:What is this injection molding machine mainly used for?
A:
It is a thin wall high speed machine for producing disposable food boxes, plastic bowls, fast food bowls, lunch boxes, takeaway boxes and other thin wall tableware.
Q:Which parts of the machine are upgraded for high speed molding?
A:
Key upgrades include a high-end servo system, thicker cast steel mechanical parts, a special plasticizing screw and barrel, an upgraded power system and a fast-response oil circuit.
Q:Does the machine help reduce electricity costs?
A:
Yes. The energy-saving servo system combined with nano infrared heating rings lowers power consumption during both heating and molding.
Q:How do you control quality before delivery?
A:
A pre-production sample is always provided before batch production, and a final inspection is carried out before every shipment.
Q:Do you offer training for our operators?
A:
Yes. We provide free training covering operation, maintenance and process optimization so your team can fully release the machine's capacity.
Send Inquiry
*To:
Ningbo Haituo Machinery Technology Co., Ltd
Ningbo Haituo Machinery Technology Co., Ltd*Content:
Supplier replies will be sent to your registered email
You may also like
Injection Molding Machines for Thin Wall Disposable Food Containers High Speed Production
US$35,210.00
1 Piece(MOQ)
Disposable Plastic Cup Box Tableware Making Injection Molding Thin Wall Moulding Machine
US$70,000.00-77,000.00
1 Set(MOQ)
Disposable Medical Test Tube Plastic Urine Blood Container Moulding Injection Molding Machine
US$70,000.00-77,000.00
1 Set(MOQ)
Automatic 5 Gallon Pet Preform Making Machine Pet Prefrom Injection Molding Machine for Large Container Manufacturing
US$22,800.00-42,560.00
1 Set(MOQ)
High Quality Food Box Injection Moulding Machine for Thin Wall Products
US$8,000.00-30,000.00
1 Set(MOQ)
Food Container Injection Moulding Machine for Thin Wall Box Quick Production
US$40,140.00
1 Piece(MOQ)
GF360kc Thin Wall Containers Injection Molding Machine for Disposable Tableware
US$70,000.00-77,000.00
1 Set(MOQ)
High Speed Thin Wall Containers Boxes Injection Beer Cups Molding Making Machine
US$70,000.00-77,000.00
1 Set(MOQ)
High Speed Plastic Takeaway Food Container Making Machine Fast Cycle Thin Wall Molding Line
US$59,150.00
1 Piece(MOQ)
Servo Injection Molding Machine for High Speed Thin Wall Food Container Production
US$9,460.00-70,140.00
1 Piece(MOQ)
Advanced High Speed Thin Wall Injection Molding Machine by Chuanghui China
US$146,000.00-152,000.00
1 Piece(MOQ)
550ton High Speed Thin-Wall Disposable Food Container Lunch Box Making Injection Molding Machine
US$28,800.00-38,800.00
1 Piece(MOQ)
High-Performance 480 Ton Injection Molding Machine for Thin Wall Production
US$68,000.00-80,000.00
1 sets(MOQ)
for Household Products Shenzhou Plastic Chair Injection Moulding Molding Machine
US$16,000.00-18,400.00
1 Set(MOQ)
High Speed Thin Wall Injection Molding Machine by Chuanghui - Origin: China
US$146,000.00-152,000.00
1 Piece(MOQ)
Powerjet High Speed Food Box Container Thin Wall Plastic Injection Molding Machine
US$39,100.00-47,800.00
1 sets(MOQ)
1000ton Servo Horizontal Large Size China Cheap Sale Making Wall Plug Plastic Pallets Injection Moulding Molding Making Machine
US$41,600.00-51,600.00
1 Piece(MOQ)