Powered by Made-in-China.com
Plastic Cup Injection Molding Machine for High Speed Thin Wall Cup Production
US$9,460.00-70,140.00
1 Piece
Product profile
Customization
AvailableAfter-sales Service
1 Year Remote WarrantyWarranty
1 YearModel NO.
HTF-250/KSType
Preform InjectionStructure
HorizontalPlastic Type
ThermoplasticPlasticizing Way
Screw TypeClamping Way
HydraulicAutomation
AutomaticComputerized
ComputerizedCertification
CE, ISO9001:2008Screw Diameter
50mmShot Size(Theoretical)
530cmInjection Rate
482gPlasticizing Capacity
460g/SInjection Pressure
180MPaScrew Speed
333rpmTransport Package
Stretch Film PackagingSpecification
According to Your NeedsTrademark
HAITUOOrigin
ChinaHS Code
8477101090Production Capacity
500 Sets/Per YearKey features
High-End Servo Drive: Features an industry-grade servo system and internationally branded parts for stable, precise and energy-saving thin wall cup molding.
Heavy-Duty Cast Steel Structure: Stronger, thicker cast steel mechanical parts reduce vibration and keep the machine rigid during long high speed runs.
Superior Plasticizing Unit: A dedicated screw and barrel with strong plasticizing capability melts material evenly for consistent thin wall cup quality.
Upgraded Power System: The fully upgraded power unit delivers steady, powerful output to support continuous cup production at high speed.
Fast Response Oil Circuit: A rapid hydraulic oil circuit speeds up clamping and injection, shortening every cycle for higher daily cup output.
Nano Infrared Heating Rings: Energy-saving infrared heating rings provide uniform barrel heating with lower energy consumption and stable temperatures.
Cup and Lid Application: Purpose-built for thin wall production of disposable cups, water cups and cup lids for beverage service.
24-Hour After-Sales Support: Service outlets across China respond within 24 hours, offering on-site repair and maintenance guidance.
Free Technical Training: Free training on operation, maintenance and process optimization helps your workers master the machine and reach full capacity.
Factory-Direct Bulk Supply: Three factories over 20,000 square meters and 200+ skilled workers ensure stable batch production for global buyers.
Company profile
CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 8 Years CertifiedNearest Port: Ningbo PortAverage Response Time: ≤6.32h
AI-Powered supplier vetting
SummaryHaituo Machinery is an injection-molding and mechanical-equipment supplier with broad manufacturing-related business activities, including special equipment manufacturing, parts processing, mold manufacturing, machine-part sales, and equipment installation services. It provides extensive customization, 3D design, ODM, and OEM services, and reported new products during the past year. The supplier holds CE and ISO 9001:2015 certifications and has seven production lines, inventory capability, and assembly and debugging lines. However, its quality and operational controls show limitations: finished products are checked by packing staff, there is no continuous batch quantity reconciliation, and no outsourcing SOP. It lacks overseas warehouse and showroom capability, has no valid manufacturing contract with related subcontractors, employs one R&D engineer, and has no SDK. Exporting began one year ago, with exports representing 21%–30% of sales. No Fortune 500 cooperation was reported, while repeat buyers...
Supplier typeThe supplier is positioned as a machinery and industrial-equipment manufacturer and service provider. Its stated activities include special equipment manufacturing, machine-part and mechanical-part sales, mold manufacturing, parts processing, and general mechanical equipment installation, while its description specifically references injection molding machines.
CertificationsThe supplier reports CE product compliance certification and an ISO 9001:2015 management-system certificate. However, it does not have a factory environmental impact assessment report and did not conduct regular fire drills during the past year; these are sustainability and safety deficiencies but do not negate the stated certifications.
R&D capabilityThe supplier provides 3D software design, ODM, and OEM services and reports new products during the past year. However, it has only one R&D engineer and no available SDK, so the evidence supports some product-development capability but not a strong or broad innovation advantage.
Production capacityThe supplier reports seven production lines, including two assembly lines and one debugging line, and has in-stock capability. Nevertheless, it has no valid manufacturing contract with related subcontractors, no outsourcing SOP, and does not continuously reconcile quantities for each batch or mass-production run, indicating operational-control weaknesses.
Customization capabilityThe supplier explicitly supports customization from designs, minor and flexible customization, customization from samples, and full customization. It also offers 3D design services, ODM, and OEM services for popular brands, providing strong direct evidence of broad customization capability.
Product Q&A
Q:What products can this machine produce?
A:
It is designed for thin wall molding of disposable plastic cups, water cups, clear cups and matching cup lids.
Q:What is special about this machine compared with standard machines?
A:
It uses an industry-grade servo system, thicker cast steel parts, a dedicated plasticizing screw and barrel, a fast oil circuit and nano infrared heating rings.
Q:Is the machine energy efficient?
A:
Yes. The servo drive system and nano infrared heating rings significantly reduce energy consumption during heating and molding.
Q:How do you guarantee machine quality?
A:
We always provide a pre-production sample before batch manufacturing and carry out a final inspection before shipment.
Q:We are new to injection molding. Can you support us?
A:
Yes. We provide free training on operation, maintenance and process optimization so your workers can master the machine quickly.
Send Inquiry
*To:
Ningbo Haituo Machinery Technology Co., Ltd
Ningbo Haituo Machinery Technology Co., Ltd*Content:
Supplier replies will be sent to your registered email
You may also like
Automotive PP Plastic Bumper Injection Molding Machine for Car Parts Production
US$28,750.00-36,000.00
1 Piece(MOQ)
Injection Molding Machines for Thin Wall Disposable Food Containers High Speed Production
US$35,210.00
1 Piece(MOQ)
High-Performance Servo Injection Molding Machine for Plastic Solutions
US$152,110.00
1 Piece(MOQ)
High-Performance Haitian Maiii 380t Injection Molding Machine for Plastic Production Efficiency
US$19,500.00
1 Piece(MOQ)
Automatic High Speed Industrial Plastic Bucket Making Machine Injection Molding Machine for Chemical Paint Pail Plastic Production Line
US$69,800.00-75,600.00
1 Piece(MOQ)
Automatic High Speed Plastic Pet Preform Injection Blow Molding Machine Price
US$8,000.00-38,000.00
1 Set(MOQ)
High Speed Plastic Parts Making Food Boxes Hydraulic Injection Molding Machine
US$70,000.00-77,000.00
1 Set(MOQ)
High-Quality Thin Wall Meal Box Plastic Injection Molding Machine
US$58,000.00
1 Piece(MOQ)
Efficient Haitian Maiii 160t Plastic Injection Molding Machine for Competitive Production
US$8,800.00
1 Piece(MOQ)
Nissei Es6000 Used Injection Molding Machine for Quick Plastic Production
US$15,000.00-16,000.00
1 Piece(MOQ)
Disposable Plastic Cup Box Tableware Making Injection Molding Thin Wall Moulding Machine
US$70,000.00-77,000.00
1 Set(MOQ)
High-Performance Haitian Maiii 380t Injection Molding Machine for Efficient Production
US$20,400.00-21,800.00
1 Piece(MOQ)
High-Efficiency 22g Preform Injection Molding Machine for Production
US$93,800.00
1 Piece(MOQ)
High Precision Servo Car Bumper Injection Molding Machine for Automotive Plastic Parts
US$125,800.00
1 set(MOQ)
High-Performance Plastic Injection Machine for Reliable Connector Production
US$2,965.00-3,326.00
1 Set(MOQ)