Vickers 35vq 45vq Single Fixed-Displacement Balanced Vane Pump 210bar for Hydraulic Press

Name: Vickers 35vq 45vq Single Fixed-Displacement Balanced Vane Pump 210bar for Hydraulic Press
Brand: Quanzhou Haizhuomaisi Machinery Equipment Co., Ltd.
SKU: 2172971162

Fujian, ChinaQuanzhou Haizhuomaisi Machinery Equipment Co., Ltd.

US$160.00-280.00

1 Piece

Product profile

Customization

Available

Type

Vane Pump

Power

Hydraulic

Model NO.

35V 45V 35VQ 45VQ

Certification

CE, ISO

Warranty

1year

Operating Pressure

up to 21 MPa / 210 Bar

Number of Stages

Single Stage

Max Horsepower

2.0 ~ 100 HP

Showroom

Other Location

Displacement

3.8 ~ 270 Cm³/Rev

Weight

Pump Type

Vane Pump

Max Flow Rate

3.8 ~ 500 L/Min at Rated Speed

Transport Package

Cardboard Boxes or Wooden Cases

Specification

steel

Trademark

vickers

Origin

Key features

Internal inlet and outlet chambers are diametrically opposed; pressure-induced radial loads are self-canceling. Bearings carry external loads only - significantly extended service life.

Rotor, vanes, cam ring, and port plates in one replaceable cartridge. Rebuild in under 2 hours without removing the pump housing or disconnecting piping.

V Series: 12-vane design for ultra-quiet industrial use. VQ Series: 10-vane design with flexible side plates, superior cold-start performance for mobile and off-highway applications. Same mounting int

V2010/V2020 double pumps (V10+V20), plus 7 double combinations from V/VQ series (2520V, 3520V, 3525V, 4520V, 4525V, 4535V, 2525V). One prime mover, two independent hydraulic circuits.

Stable operation from 600 rpm (V/VQ) to 4,000 rpm (V10). Ideal for variable-speed servo drives and constant-pressure systems.

Compatible with anti-wear petroleum oils, water-glycols, phosphate esters, and synthetic esters.

Double-acting balanced design produces exceptionally smooth flow output. First choice for precision-sensitive applications: machine tool feeds, precision presses, injection holding pressure.

Company profile

In-stock CapacityODM Services100% Finished Products InspectionR&D Capabilities

Quanzhou Haizhuomaisi Machinery Equipment Co., Ltd.

Fujian, China

CertifiedBusiness Type: Trading Company CertifiedR&D Capacity: ODM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 1 Year CertifiedNearest Port: Xiamen PortAverage Response Time: ≤1.45h

AI-Powered supplier vetting

SummaryThe supplier is identified as a professional technical machinery supplier with nearly 20 years of industry experience, one production line, one R&D engineer, fewer than five quality-control staff, and stated production quantities for hydraulic components. It offers flexible, minor, full, design-based, and sample-based customization, as well as application solutions and post-purchase troubleshooting support. However, finished products are checked by packing staff, no written supplier-service assessment procedures are recorded, and there is no evidence of certifications or customer cases. The supplier reported no new products in the past year, no SDK, and no 3D software design service. It has stock capability but no overseas warehouses, branches, agents, showrooms, or offline trade-show participation. The financial information supplied shows zero operating figures for the reported periods; monetary figures are omitted here for privacy.

Supplier typeThe supplier explicitly identifies itself as a professional technical supplier and describes a machinery and equipment business with an experienced technical team and nearly 20 years of industry involvement. Its product and service profile centers on hydraulic components, technical product selection, and machinery application solutions.

After-Sales capabilityThe supplier states that it provides lifelong fault technical support and rapid troubleshooting, and it has in-stock service capability with stated lead times of within 15 working days in both peak and off-season periods. However, it has no overseas agents, branches, warehouses, or showrooms, and its service-capability assessment lacks written procedures and followed records.

Financial creditThe supplied financial-capacity records report zero operating figures for the stated periods. This is explicit financial information that may raise credibility concerns, but the slices provide no explanation, validation, or additional financial evidence sufficient to establish the underlying cause or overall financial reliability.

R&D capabilityThe supplier has one R&D engineer and offers ODM services plus multiple forms of customization. Nevertheless, it reported no new products in the past year, does not provide 3D software design services, and has no available SDK, indicating limited evidence of current product innovation.

Production capacityThe supplier operates one production line and reports annual quantities for hydraulic valves, pumps, motors, cylinders, and accessories, while also stating that it has in-stock capability. Production oversight appears limited because there is one quality assurance and quality control inspector, fewer than five quality-control staff, and finished products are checked by packing staff.

Customization capabilityThe supplier explicitly offers flexible, minor, full, design-based, and sample-based customization, and describes designing and tailoring solutions to specific machinery and performance requirements. ODM service availability further supports its customization and design-manufacturing capability, although 3D software design is not provided.

Product Q&A

Q:What are your main product areas?

1. hydraulic pump 2, hydraulic valve 3.Hydraulic motor 4. Hydraulic cylinder 5, hydraulic accessories 6, hydraulic accessories 7.Hydraulic system

Q:How do I pay?

Full order: 30% deposit, balance paid before delivery. Small order/sample order: full payment in advance. Custom products: full payment in advance.

Q:How long is the warranty period?

The warranty period of the product is one year from delivery

Q:Do you support customization and proofing?

Products can be customized according to customer requirements.but also can be customized according to the original model providedby the customer to replace the product.