High-Strength Open Link Chain for Heavy-Duty Lifting and Mooring

It is generally recommended to conduct a preliminary visual inspection before and after each ship's voyage. A more comprehensive inspection, including a detailed check of the chain links, connecting components, etc., should be carried out at least once a month. For ships operating in harsh environments for an extended period, the inspection frequency should be appropriately increased.

Use tools such as calipers to measure the diameter of the chain links and compare it with the original design dimensions. Generally, if the wear of a chain link exceeds 10% of its original diameter, it can be considered that the wear exceeds the standard, and replacement or repair should be considered.

For general dirt and rust, clean water and a wire brush can be used for cleaning. If the rust is severe, a mild acidic rust remover can be used, but it should be rinsed thoroughly with clean water in a timely manner to avoid residues. There are also special ship anchor chain cleaning agents that can effectively remove oil stains, marine organisms, etc., and have less corrosiveness to the anchor chain material.

Usually, a high - pressure water gun with a pressure of 1000 - 3000 PSI (pounds per square inch) is more appropriate. If the pressure is too low, it may not effectively remove debris, and if the pressure is too high, it may damage the surface of the anchor chain.

Ship - specific anti - rust paint with good anti - corrosion performance, such as epoxy zinc - rich paint, should be selected. This kind of paint can form a firm protective film on the surface of the anchor chain, effectively preventing seawater corrosion and having good wear resistance.