Safety Factor 6: 1 Polyester Four Layers Endless Lifting Webbing Sling

Mainly through the appearance inspection, parts inspection and identification inspection to judge. Check whether the sling is worn, cut, torn, broken wire, faded, aging, etc., whether the metal accessories are deformed, cracked, corroded, whether the mark is clear and complete and consistent with the actual use, if there are serious problems, you can not continue to use.

The color of braided lifting straps is usually used to distinguish between different load ratings. For example, the general white may represent a lower load, green, yellow, etc., may represent different levels of higher loads, but the specific color corresponding to the load standard may vary from manufacturer to manufacturer, should be subject to product identification and instructions.

Under normal circumstances, it is not recommended to use ordinary braided lifting sling to lift high temperature objects, because high temperature may reduce the material performance of the sling, such as strength reduction, deformation, etc. If you need to lift high temperature objects, you should choose a special braided lifting sling with high temperature resistance and ensure that the temperature is within its tolerance range.

When multiple suspenders are used together, it is necessary to ensure that their total rated load can meet the lifting weight requirements, and the length of each suspender should be as consistent as possible to ensure uniform force. At the same time, the lifting points should be reasonably distributed to avoid entanglement and friction between the straps.

After use, wipe the dirt, oil and debris on the surface with a clean wet cloth in time. If you have been exposed to corrosive substances, rinse with water, rinse in a well-ventilated place to dry naturally, avoid direct sunlight, you can also use a mild detergent, but be sure to rinse thoroughly to prevent residue.