Structure Multi- Layer Offshore Industry and Mooring Rope

Under normal circumstances, the synthetic fiber rope can be washed with water to remove dust, dirt and salt on the surface. If there are stubborn stains, you can use a mild neutral cleaner, wipe gently with a soft cloth or brush, and then rinse thoroughly with water to avoid detergent residue.

Strong detergents or bleach are not recommended because they may damage the structure and properties of synthetic fibers, causing problems such as reduced strength and brittleness of the rope.

Synthetic fiber rope should be stored in a dry, well-ventilated place, avoid direct sunlight and humid environment. It is best to hang it on a hook or put it on a special rope rack to prevent the rope from twisting, knotting and compression deformation.

No, high temperature will make the synthetic fiber rope material aging, brittle, reduce its strength and flexibility. In general, the storage environment temperature should be kept within the normal temperature range, avoid close to heat sources, such as heating, furnaces, etc.

In the process of use, to avoid direct contact between the rope and sharp, rough objects, you can use MATS or rope sleeves and other protective ropes. At the same time, do not let the rope drag on the ground to prevent the sand and stones on the ground from wearing the rope. When going around pulleys or other objects, make sure that the surface of the pulley and other parts is smooth, free of burrs and edges.