Powered by Made-in-China.com
Product profile
Customization
AvailableType
Sscd Dimond DiesMaterial
SscdModel NO.
BSD2451Shaping Mode
Die CastingHole Type
Round MouldCavity
Multi-cavitySurface Treatment
PolishApplication
Hardware, Household Appliances, Home Use, Commodity, Electronic, CarCertification
ISOWarranty
1 YearCustomized
CustomizedTransport Package
Plastic or Paper Box(Customized)Specification
0.015-1.5mmTrademark
Red StarOrigin
Anhui, ChinaHS Code
8207209000Production Capacity
50000pieces/YearKey features
Decobalt Polycrystalline Material: Widely used in high temperature hard wire drawing for highest productivity.
Longest Life Material: Provides the longest life on the market today and reduces downtime.
Multi-Cavity Design: Features multi-cavity structure for efficient production.
Polished Surface Treatment: Surface is polished to ensure smooth operation and quality.
Round Mould Hole Type: Designed with round mould holes for standard wire drawing.
ISO Certified: Product meets ISO certification standards for quality assurance.
1 Year Warranty: Comes with a comprehensive 1-year warranty coverage.
Customized Options: Product is available in customized configurations.
Company profile
Business Type: Manufacturer/FactoryExport Year: 2024-02-27Nearest Port: ShanghaiAverage Response Time: ≤1.08hTerms of Payment: LC, T/TInternational Commercial Terms(Incoterms): FOB, EXW, CIF, DDP, CFR, DAP
AI-Powered supplier vetting
SummaryThe supplier has over 30 years of experience and operates under the ISO 9001 quality system, ensuring quality control and management. Although it lacks innovation capabilities and overseas service infrastructure, it provides robust customization services and holds a good reputation in after-sales service. The supplier also has strong in-stock service capacity but does not engage in offline trade shows or overseas warehousing.
CertificationsThe supplier holds ISO 9001 certification, ensuring a quality management system is in place.
After-Sales capabilityThe supplier is reputed for excellent after-sales service, supported by skilled personnel and advanced equipment.
R&D capabilityThe supplier lacks R&D for new products and SDK availability, indicating limited innovation capabilities.
Production capacityThe supplier has a large production area, numerous equipment sets, and a high monthly output, supporting strong production capacity.
Customization capabilityThe supplier offers extensive customization services, including OEM and ODM processing, and various customization options.
Product Q&A
Q:Are you a manufacturer or trading company?
A:
We are a manufacturer of wire drawing dies, our factory is located in Tianchang city, Anhui province where is 2 hours-driving from Nanjing airport
Q:What can you buy from us?
A:
Natural Diamond Drawing Die(ND drawing dies) polycrystalline drawing die( PCD drawing dies) Tungsten Carbide wire drawing die(TC drawing dies) Synthetic single crystal diamond wire drawing die (SSCD drawing dies) Monocrystalline wire drawing die (MCD drawing dies) Nano wire drawing die
Q:What determines the sizing length of the wire drawing die?
A:
The sizing area determines the surface quality and wire diameter of the wire. The sizing length (L) is usually about 20% to 50% of the nominal wire diameter (?). However, this percentage depends on the wire material, drawing process, and drawing specification.
Q:How can I extend the uptime of my wire drawing machine?
A:
Use a quality wire feed/rod and properly maintain your machine and lubricants. Choose the best wire drawing die material, use the correct sequence of die sizes, and use the proper internal geometry (corners and sizing bands) to match the wire alloy you are drawing.
Q:Wet drawing: How to maximize the life of the drawing die?
A:
Maintain lubricant concentration and temperature within supplier recommended parameters. Failure to do so will reduce lubricity and lead to increased die wear. Make sure your filtration system is functioning properly to keep your drawing lubricant clean. Ideally, ensure that the lubricant nozzle is pointed toward the entrance of the drawing die to keep the entrance part of the drawing die clean and prevent the die from clogging. Make sure the wire enters and exits the mold as vertically as possi
Send Inquiry
*To:
Tian Chang Redstar Wire Drawing Die Factory
Tian Chang Redstar Wire Drawing Die Factory*Content:
Supplier replies will be sent to your registered email
You may also like
Custom Made Wire Drawing Compacting Stranding Bunching Dies
US$10.00-30.00
10 Pieces(MOQ)
PCD Sz Stranding Wire Drawing Dies for Hybrid Fiber and Copper Cables
US$3.00-10.00
10 Pieces(MOQ)
Split Stranding Dies for Wire and Cable
US$10.00-200.00
10 Pieces(MOQ)
PCD S-Z Stranding Dies Wire Drawing Dies for Manufacturing Combined Power and Fiber Cables
US$3.00-10.00
10 Pieces(MOQ)
Durable PCD Wire Drawing Dies for S-Z Type Cable Twisting and Stranding Machines
US$3.00-10.00
10 Pieces(MOQ)
Tc Stranding Extrusion Dies for Steel and Copper Wire Drawing
US$30.00-100.00
5 Pieces(MOQ)
Wholesale PCD Dies for Consistent S-Z Stranding Wire Drawing Dies of Power and Data Cables
US$3.00-10.00
10 Pieces(MOQ)
PCD Compacting Dies/DC Stranding Dies/Nano Coating Bunching Die
US$30.00-100.00
5 Pieces(MOQ)
Carbide Drawing Dies for Metal Wire, Rod, Bar and Tube
US$7.50-8.60
50 Pieces(MOQ)
Polycrystalline Diamond PCD Wire Drawing Die for Copper and Stainless Steel
US$15.00-30.00
10 Pieces(MOQ)
Tungsten Carbide Dies High Strength and Toughness Tc Wire Drawing Dies for Cable Drawing
US$5.80-25.90
100 Pieces(MOQ)
Tungsten Carbide Cold Extrusion Dies for Aerosol Cans and Crowns
US$40.00-60.00
5 kg(MOQ)
Shanghai Swan PCD Drawing Dies with Long Mould High Strength and Toughness Drawing Dies
US$10.00-20.00
1 Bag(MOQ)
Tungsten Carbide Tube and Wire Drawing Die
US$2.00-50.00
1 Piece(MOQ)
Advanced Cold Forging Dies for Precision Fasteners and Components
US$62.00-120.00
1 Piece(MOQ)
Tc Drawing Dies Available in Round Sizes. 004" (0.1 mm) and Lager
US$5.00-50.00
1 Piece(MOQ)
